You spend a lot of time in your CR-V, and the right phone holder can make navigation, charging, and hands-free calls feel much easier. For a 2019 Honda CR-V, the best mount should fit the 2017–2022 interior shape, keep your phone visible, avoid blocking vents or controls, and stay steady over bumps.
Start with fit and stability before you worry about extras like MagSafe or wireless charging. The picks below focus on CR-V-friendly dash, screen, vent, and magnetic mounts that make sense for daily driving, thicker phone cases, and clean cabin placement.
Top Picks
|
Category |
Product |
Best For |
|---|---|---|
|
🏆 Best Overall |
Clean 2017–2022 CR-V dash fit |
|
|
💡 Best Design for Dash Integration |
Car Phone Holder for Honda CR-V 2017-2022 Special Edition (YEGZA) |
Factory-style screen-area placement |
|
⚡ Best MagSafe / Magnetic Option |
MagSafe-style snap-on use |
|
|
🎯 Best for Thick Cases |
Large phones and bulky cases |
|
|
🚀 Best Fit for 5/7-inch Screens |
5/7-inch screen setups |
|
|
💰 Best Budget Pick |
Simple hazard-area mounting |
|
|
🔊 Best for Clean Dash Placement |
APESER Navigation Screen/Dashboard Mount (Compatible 2017-2021) |
2019 CR-V low-profile placement |
|
🔋 Best Wireless Charging Option |
Wireless charging convenience |
|
|
🔒 Best Custom Magnetic Alternative |
Low-profile magnetic mounting |
|
|
🎯 Most Versatile / Vehicle-Specific Base |
Driver or passenger placement |
Quick Verdict for a 2019 Honda CR-V
Choose YIXKTUKEKE or YEGZA if you want the cleanest factory-style fit for the 2017–2022 CR-V dash. Choose MaserWeller or TUYICN if you prefer a MagSafe-style magnetic setup. Choose Karltys or APESER if you want a lower, non-suction mount that avoids windshield clutter. Choose PZK only if wireless charging is more important than the simplest mechanical grip.
Fitment reminder: before ordering, confirm your CR-V model year, screen size, left-hand-drive layout, phone size, case thickness, and whether the holder may sit near the hazard button or vent controls.
How We Picked These Phone Holders
You want a mount that fits your 2019 CR-V without obstructing vents, controls, airbags, or your view. We evaluated each option on fit with 2017–2022 CR-V dashboards and infotainment screens, mounting style, non-destructive installation, stability, one-hand use, case compatibility, MagSafe or wireless charging support, charging-port access, and overall value.
We also looked for mounts that solve common CR-V owner frustrations: vent clips that sag, suction cups that fall off, phone holders that block the hazard button, and magnetic mounts that struggle with thick cases.
Before You Buy: 2019 CR-V Fitment Checklist
- Confirm your model year: 2019 is part of the 2017–2022 CR-V generation, but not every listing covers every trim.
- Check screen size: many screen-mounted holders are designed around 5-inch, 7-inch, or specific screen-bezel shapes.
- Check your phone case: wallet cases, PopSockets, rugged cases, and MagSafe cases can change how well a cradle or magnet works.
- Check control access: make sure the mount does not make the hazard button, vents, climate controls, or shifter harder to reach.
- Follow safe placement rules: keep the phone out of airbag zones and avoid positions that block your windshield view.
Car Phone Mount for Honda CR-V (2017–2022)
If you drive a 2017–2022 CR-V and want a phone holder that looks more integrated than a suction cup, this mount is the safest starting point. It is built for the CR-V dash area, gives you 360° rotation for portrait or landscape viewing, and supports common phone sizes without forcing you to remove a normal protective case.
It works best for drivers who want one simple holder for navigation, hands-free calls, and daily charging access. The main thing to check is the base placement: press it firmly into the recommended position and test the view before driving.
What People Say
Most people note that it fits the CR-V well and clamps securely around phones, including phones with protective cases. Several reviewers praise the clean install and simple daily use. A few mention mild shaking over big bumps or rare problems staying attached, so proper installation matters.
Overall Sentiment: Positive
🗣️ Lisa heibel
Great quality fits perfect best phone holder I have purchased. Seems built for the car and installs cleanly.
🗣️ jarhead
It fit perfectly as advertised. It shakes a little on bumps but holds the phone nicely. Glad I found this — very usable for navigation.
Who Should Buy This
Choose this if you want a simple, vehicle-specific holder for a 2017–2022 CR-V and you use a normal or moderately thick phone case.
Who Should Avoid This
Skip it if you want built-in wireless charging or if you prefer a magnetic MagSafe-style mount with no side arms.
Why You’ll Like It
- Model-specific fit for Honda CR-V 2017–2022 for a tidy, factory-like install
- 360° ball-joint rotation so you can flip between portrait and landscape
- Holds many 4.0–7.0-inch phones with standard protective cases
- One-hand operation and anti-shake design for easier use while parked or before driving
- Low-profile placement compared with windshield suction mounts
Check Product Details on Amazon
Car Phone Holder for Honda CR-V (2017–2022)
If you want your phone close to the infotainment screen without sticking a suction cup to the windshield, this YEGZA holder is a strong match. It is shaped for the 2017–2022 CR-V dash area, gives you a reserved charging-port opening, and keeps the phone in a natural navigation position.
The weight-activated clamp makes everyday use simple: set the phone in, let the arms grip, and rotate the screen to the angle you prefer. For heavier phones, press the base and adhesive contact points carefully during installation.
What People Say
You’ll see a lot of reviewers noting the near-perfect fit for the CR-V and how unobtrusive the mount looks. Many praise the simple install and secure grip; a few call out mild wobble over rough roads or wish the plastic felt sturdier. Several users also recommend using the adhesive strip when fitting heavy phones.
Overall Sentiment: Positive
🗣️ EricInWA
After months of use the placement feels perfect and the install is simple and reliable. The holder uses the phone’s weight to lock the arms in place and the rubber-coated grips hold well even with one-handed use.
🗣️ L. King
This checked all my boxes for a leased CR-V — it stayed stable once the adhesive strip was used on the infotainment head and handled a large Galaxy with a bulky case without falling off.
Who Should Buy This
Choose it if you want a clean screen-area mount that keeps vents mostly clear and makes charging easy.
Who Should Avoid This
Skip it if you dislike adhesive assistance or need a mount you can move between different cars often.
Why You’ll Like It
- Model-specific fit for Honda CR-V 2017–2022 for a tidy, integrated look
- 360° ball-joint rotation for quick portrait or landscape switching
- Holds most 4–7 inch phones with regular or thicker cases
- One-hand operation and weight-activated clamp for easy in/out
- Reserved charging port and low-profile base to avoid blocking key controls
Check Product Details on Amazon
MaserWeller Car Phone Holder (2017–2022 CR-V)
If you use a MagSafe iPhone or want a cleaner magnetic setup, this MaserWeller holder is one of the more natural fits for a 2019 CR-V. It sits near the screen instead of the windshield, rotates easily, and includes a metal ring option for phones or cases that need magnetic help.
It is best for drivers who want quick one-hand docking without side arms. If you use a heavy rugged case, test the magnet and ring alignment before relying on it for rough roads.
What People Say
You’ll find a lot of reviewers praising the near-factory fit and quick, tool-free install. People highlight the strong magnet and stable hold during normal driving, though a few mention tightening the mounting screw or using the adhesive for heavier phones.
Overall Sentiment: Positive
🗣️ Amazon Customer
The fit is perfect — it clicks right into place and looks like it came with the car. The mount is very sturdy, holds my phone securely even on bumpy roads, and doesn’t block the air vents or buttons. Installation took less than 5 minutes, no tools required.
🗣️ Mikey über Alles
It fit snugly and looks like it came with the vehicle. It included a metal ring and the magnet is plenty strong—no issues with my phone slipping or moving. Much better than mirror-mounted holders I used before.
Who Should Buy This
Choose this if you want a magnetic mount for a 2017–2022 CR-V and prefer fast phone attachment over a clamp-style cradle.
Who Should Avoid This
Skip it if you use a wallet case, very thick case, or a phone setup that does not work well with magnetic rings.
Why You’ll Like It
- Tailored fit for Honda CR-V 2017–2022 for a clean, integrated look
- 360° rotation for easy portrait or landscape viewing
- MagSafe-style compatibility for supported iPhones and metal ring option for others
- One-hand attachment and release for quick use before driving
- Designed to avoid blocking vents or dashboard controls
Check Product Details on Amazon
DJXCAR Dashboard Phone Mount (CR-V 2017–2025)
The DJXCAR mount makes sense if your main concern is fitting a bigger phone or a thicker case. The automatic side buttons make docking easier than a tight manual cradle, and the 360° joint gives you enough adjustment for maps, calls, or music controls.
Because the listing covers a wide year range, confirm your 2019 CR-V screen shape before ordering. The 2017–2022 and newer CR-V interiors are different, so broad fitment claims deserve a second look.
What People Say
Buyers often say the holder feels made for the CR-V dash and keeps the phone steady during normal driving. Reviewers also like that it does not rely on a traditional vent fin clip. A small number mention missing hardware or unclear instructions, so inspect the box before installation.
Overall Sentiment: Positive
Who Should Buy This
Choose it if you use a larger phone, a protective case, or a setup that does not work well with magnetic holders.
Who Should Avoid This
Skip it if you want a mount that lists only 2017–2022 CR-V compatibility with no broad-generation wording.
Why You’ll Like It
- Marketed for Honda CR-V 2017–2025, with 2019 included in the stated range
- Works with many 4.7–7 in phones and is friendly to thicker cases
- 360° ball joint for easy portrait or landscape viewing
- Automatic side buttons allow one-hand insertion and quick release
- Tool-free ABS installation that helps keep vents and controls accessible
Check Product Details on Amazon
AOUKKL CR-V Screen Mount (2017–2025)
If your 2019 CR-V has the screen shape this mount is designed for, the AOUKKL holder gives you a tidy dash-mounted setup without a windshield suction cup. It supports common large phones, rotates easily, and leaves charging cables accessible.
The biggest reason to choose it is fit: it is made for the screen area, not a universal vent fin. The biggest reason to double-check is also fit: confirm the product page’s screen-size note against your actual CR-V trim before buying.
What People Say
Buyers consistently mention that it fits the CR-V dash well and holds phones securely on bumpy roads. Many praise the easy install and one-hand operation, while a few note minor fit or adhesive issues out of the box.
Overall Sentiment: Positive
🗣️ The Long Family
Was skeptical at first and waited almost 6 months to do a review. But I love this item. Sturdy and keeps my phone steady. A must have for the CRV.
🗣️ Melissa Mueller
Great product. I have been using it for a few months without a problem. It is easy to install and uninstall. It fits like it should, and my husband and son are able to use their phones in the holder, too.
Who Should Buy This
Choose it if your CR-V screen size matches the product listing and you want a stable cradle for a large phone.
Who Should Avoid This
Skip it if you are unsure about your screen size or want a magnetic mount instead of a cradle.
Why You’ll Like It
- Marketed for Honda CR-V 2017–2025, with 2019 included in the stated range
- Designed around 5/7-inch screen fitment, so screen size matters
- Accepts many 4.7–7 in phones and works with thicker cases
- 360° ball joint lets you switch between portrait and landscape easily
- Tool-free ABS installation that helps keep vents and charging ports accessible
Check Product Details on Amazon
Karltys CR-V Vent / Hazard Phone Holder
The Karltys mount is a practical choice if you want a CR-V-specific holder without paying for wireless charging or a magnetic setup. It mounts near the hazard/center area, keeps the phone closer than many vent-fin clips, and uses a bottom tray to keep the charging port reachable.
Its main advantage is simplicity. Its main caution is control access: after installing it, make sure the hazard button and nearby controls remain easy to reach from your normal driving position.
What People Say
Buyers repeatedly note how easy it is to install and that the mount holds phones firmly on bumpy drives. Most say it fits CR-V dashboards well and keeps charging accessible; a minority mention occasional squeaks or that the base can feel a bit flimsy and may partially obstruct the hazard button.
Overall Sentiment: Positive
🗣️ Chris Andres
Easy installation, took five minutes. Fit perfectly on a 2019 Honda CRV
🗣️ sixxth
After having the “clip into a vent fin” phone holder that constantly fell off I decided to try this for my 2018 CRV. The base snapped on very nicely, and grips my phone well. Once installed, the phone is rock solid, works great.
Who Should Buy This
Choose it if you want a lower-cost, non-magnetic holder made for 2017–2022 CR-V dashboards.
Who Should Avoid This
Skip it if you frequently use the hazard button and do not want anything near that control area.
Why You’ll Like It
- Made to fit Honda CR-V 2017–2022 for a secure, near-factory look
- Works with many 4–7″ phones and thicker cases
- Bottom tray helps leave charging ports open
- 360° swivel ball joint for easy portrait or landscape viewing
- Quick snap-in installation that avoids traditional vent-fin clipping
Check Product Details on Amazon
APESER 2017-2021 CR-V Dash/Vent Phone Holder
If you drive a 2019 Honda CR-V and want the phone low and close to the center vent area, this APESER mount is worth considering. It is not the best choice for every model year because the listing is focused on 2017–2021, but that range does include 2019.
The mount is designed to sit between the instrument panel and center vent, giving it a cleaner look than a windshield suction cup. If you use an oversized wallet case, check the cradle width before ordering.
What People Say
You’ll find a lot of owners praise how well it seats into the dash and how steady it keeps phones during everyday driving and on rough roads. Several users mention the mount solves the usual vent-clip or suction issues.
A minority report plastic parts breaking or that the supplied cradle is tight with thick/wallet cases, but some were able to swap the cradle successfully.
Overall Sentiment: Positive
🗣️ CatbertCool
Fit like a glove on my 2019 CR-V — the base clicked into the dash, didn’t interfere with vents or controls, and kept the phone firm even on rough roads.
🗣️ Craig D
Bracket grips the dash without suction and holds the phone rigidly out of the way of the nav and vent. I swapped in a bigger cradle to accommodate my case and it worked perfectly.
Who Should Buy This
Choose this if you have a 2017–2021 CR-V, especially a 2019, and want a low-profile mount that does not sit high on the dash.
Who Should Avoid This
Skip it if you have a 2022 CR-V or a very thick wallet-style case unless the product page confirms your exact fit.
Why You’ll Like It
- Tailored fit for 2017–2021 Honda CR-V, including 2019
- Snaps into the gap between instrument panel and center vent without drilling
- 360° swivel lets you switch between portrait and landscape easily
- Non-slip cradle and sturdy ABS base help reduce phone movement on bumpy roads
- Keeps the phone lower than many windshield or dash-top mounts
Check Product Details on Amazon
PZK CRV 5th Gen Magsafe+ Charger
If you want one mount that can hold your phone and reduce cable clutter, the PZK wireless-charging option is the most feature-focused pick here. It is designed for magnetic docking, so it works best with MagSafe-compatible iPhones or phones using the included magnetic ring.
Wireless charging depends on your phone, case, cable, power source, and alignment. If your phone runs hot in summer, remove thick cases when needed and avoid high-power charging in direct sun for long periods.
What People Say
Owners tend to like the convenience of having the phone visible and charging in one place. Many praise the strong magnetic hold and easy installation, while a few mention fit or tilt issues with certain phones or cases.
Overall Sentiment: Positive
🗣️ D. Goodwin
Magnet is very strong and holds my phone up out of the way; the mount fits well and gives you reliable hands-free use while you navigate or take calls.
Who Should Buy This
Choose it if you want wireless charging and magnetic docking more than a mechanical cradle.
Who Should Avoid This
Skip it if you use a very thick case, a wallet case, or a phone that does not align well with magnetic charging rings.
Why You’ll Like It
- Designed for CR-V 5th-gen style dash placement
- MagSafe-style magnetic alignment with seller-listed wireless charging support
- 360° ball joint lets you switch between portrait and landscape easily
- One-hand docking and firm magnetic grip keep the phone accessible
- Includes a magnetic ring for some non-MagSafe phones
Check Product Details on Amazon
TUYICN MagSafe Magnetic Mount (CR-V 2017–2022)
If you prefer a simple magnetic puck over a cradle, the TUYICN mount gives your 2019 CR-V a cleaner look and fast one-hand phone placement. It is best for MagSafe iPhones or phones/cases that work well with adhesive metal rings.
The tradeoff is that magnetic mounts rely on alignment and case compatibility. For rough roads, heavy phones, or thick cases, use the included adhesive support and test the hold before longer drives.
What People Say
You’ll see owners praise the straightforward install and steady magnetic hold. Many like how it sits neatly over the screen and keeps navigation in view. A few users mention the plastic feels a bit fragile and that using the included adhesive or extra tape makes the fit more secure.
Overall Sentiment: Positive
🗣️ Brian D.
Easy to install — it ships with adhesive strips you can tuck under the head unit and the mount stays put. The small storage cup behind the base is a nice touch and it held steady for over a month in regular driving.
🗣️ AnitAZ
Includes two ball mounts and a magnetic puck that looks like factory gear once installed. The magnet held a Galaxy Note 20 Ultra (thin case) when used with the supplied adhesive ring, and the whole fit slides over the display cleanly.
Who Should Buy This
Choose it if you want a simple magnetic mount and your phone or case supports MagSafe-style attachment well.
Who Should Avoid This
Skip it if you use a very heavy phone, thick wallet case, or dislike adhesive-backed accessories near the screen.
Why You’ll Want It
- Designed to fit the CR-V 2017–2022 5/7-inch screen area for a tidy, integrated look
- Strong N55 magnetic array helps keep phones stable during normal road driving
- 360° ball joint for quick portrait or landscape adjustments with one hand
- Mount doesn’t rely on vent fins and installs without drilling
- Compatible with MagSafe iPhones and other phones when used with metal/adhesive rings
Check Product Details on Amazon
Focada Car Phone Holder (CR-V 2017–2022)
If you share your CR-V or want both driver and passenger placement options, the Focada mount stands out. It is built around a vehicle-specific base and gives you a clean, removable setup that does not depend on suction.
Before buying, confirm the screen-size note on the product page against your trim. If the listing mentions multiple screen sizes, match that to your actual 2019 CR-V interior before checkout.
What People Say
Owners like that the mount looks like it belongs in the CR-V, snaps on quickly, and holds phones securely on regular roads. Many point out the convenience of being able to move it between driver and passenger sides and appreciate the detachable track for cleaning or replacement.
Overall Sentiment: Positive
🗣️ CRV Owner
Quick installation takes about 30 seconds to 1 minute. Easy to remove without leaving residue or damaging the dashboard — reusable design makes it handy for taxis and shared cars.
🗣️ RoadTester
The double non-slip design on the clamping arm and bottom keeps phones firmly fixed even on bumpy roads; the soft-but-grippy lining prevents slipping without scratching the phone.
Who Should Buy This
Choose this if you want a removable, vehicle-specific mount with more placement flexibility than a single fixed cradle.
Who Should Avoid This
Skip it if your CR-V screen size or dash trim does not match the product page’s fitment notes.
Why You’ll Want It
- Vehicle-specific dashboard base for a clean, integrated fit
- Useful driver or passenger-side placement options
- Quick, tool-free install and removal without a windshield suction cup
- 360° ball joint for easy portrait/landscape adjustments
- Non-slip pads and ABS construction for stable everyday use
Check Product Details on Amazon
FAQ
Which Mount Type Is Best For My 2019 Honda CR-V?
For most 2019 CR-V drivers, a vehicle-specific dashboard or infotainment-screen mount is the best starting point because it usually looks cleaner and stays more stable than a generic vent clip. These mounts are shaped around the CR-V interior and can keep your phone near your natural line of sight without using a windshield suction cup.
If you use MagSafe, a magnetic screen mount is faster for one-hand docking. If you use a thick case, choose a cradle with side arms and a bottom tray. If you want charging convenience, choose a wireless charging mount, but confirm your phone, case, cable, and power adapter work together.
Will These Holders Damage My Dashboard Or Interfere With Airbags And Controls?
Most CR-V-specific holders are designed to install without drilling, but any mount can cause problems if it is forced into the wrong spot. Avoid placing your phone in an airbag deployment zone or anywhere that blocks the windshield, hazard button, climate controls, shifter, or infotainment buttons.
If the mount uses adhesive, clean the surface first, apply it only where the manufacturer recommends, and avoid fragile trim surfaces. If you lease your CR-V, a clip-on or removable base may be safer than a strong adhesive pad.
How Do I Keep My Phone Secure And Stable On Bumpy Roads And With Thick Cases?
Choose a holder that specifically supports your phone size and case thickness. Cradle designs with side arms, rubber pads, and a bottom support usually work better for rugged cases than shallow magnetic plates. Magnetic mounts can still work well, but only when the ring or MagSafe case is aligned correctly.
After installation, take a short test drive on a familiar road. Check for wobble, slipping, blocked controls, cable strain, and glare. Tighten the ball joint enough to hold position, but do not over-tighten plastic parts.
Do 2017–2022 And 2023–2025 CR-V Phone Mounts Fit The Same?
Not always. The 2017–2022 CR-V and newer 2023+ CR-V have different interior layouts, screen shapes, and vent designs. If a listing claims a very wide year range, double-check the screen size and product photos against your exact 2019 CR-V dashboard before buying.
Is A MagSafe Or Wireless-Charging Mount Worth It?
A MagSafe-style mount is worth it if you want fast one-hand attachment and your phone case supports magnetic alignment. A wireless-charging mount is worth it if you drive often and want fewer cables, but it can charge more slowly or run warmer depending on your phone, case, cable, adapter, and cabin temperature.
If you use a rugged case, wallet case, or metal plate, a standard cradle may be more reliable than a magnetic charger.
What Buyers Prefer
Most CR-V owners want a holder that feels stable, fits the dash cleanly, avoids windshield clutter, and keeps the charging port reachable. The most useful features are usually a vehicle-specific base, one-hand docking, 360° rotation, rubberized grips, and clear compatibility with 2017–2022 CR-V interiors.
Wrapping Up
You now have a focused list of phone holders that make sense for a 2019 Honda CR-V. If you want the safest all-around fit, start with a 2017–2022 CR-V-specific dashboard or screen mount. If you want faster phone placement, choose a MagSafe-style magnetic holder. If you want fewer cables, consider a wireless-charging option, but confirm your phone and case compatibility first.
For the best result, choose fit first, stability second, and extra features third. A mount that fits your CR-V correctly will be more useful than a feature-heavy holder that blocks controls, shakes over bumps, or does not match your screen size.
| Product | Image | Best For | Mounting Type | Special Highlights | Amazon Details |
|---|---|---|---|---|---|
| Car Phone Mount for Honda CR-V 2017-2022 |
 |
Best overall fit for 2017–2022 CR-V | Vehicle Mount |
|
Check Price |
| Car Phone Holder for Honda CR-V 2017-2022 Special Edition |
 |
Factory-style dash integration | Dashboard |
|
Check Price |
| MaserWeller Car Phone Holder for Honda CRV (5 & 7 inch screen) |
 |
MagSafe-style attachment | Infotainment Touch-screen |
|
Check Price |
| Car Phone Holder Mount for Honda CRV 2017-2025 |
 |
Large phones and thick cases | Dashboard |
|
Check Price |
| Car Phone Holder Fits for Honda CRV 2017-2025 |
 |
5/7-inch screen fitment | Dashboard |
|
Check Price |
| Karltys Car Phone Holder for Honda CR-V 2017-2022 |
 |
Budget-friendly 2017–2022 fit | Vent / Hazard Area |
|
Check Price |
| Compatible with 2017-2021 Honda CRV Air Vent Phone Holder |
 |
2019 low-profile dash placement | Air Vent / Dash Gap |
|
Check Price |
| Car Phone Mount for Honda CRV 2017-2022 Magsafe Wireless Charger |
 |
Wireless charging convenience | Vent / Dash Magnetic Charger |
|
Check Price |
| Car Phone Holder for Honda CRV 2017-2022 Custom Fit |
 |
Low-profile magnetic mounting | Navigation Screen |
|
Check Price |
| Car Phone Holder for Honda CRV 2017-2022 Vehicle-Specific |
 |
Driver/passenger placement flexibility | Vehicle-specific Base |
|
Check Price |
This roundup is reader-supported. When you click through links we may earn a referral commission on qualifying purchases.
