Last updated: September 11, 2026
To fold a Baby Trend Expedition Stroller with the standard JG94 trigger-fold system, close the canopy, recline the seat, pull both fold triggers at the same time, then press the handle downward until the stroller is completely folded. Finish by locking the fold latch on the right side over the rivet that protrudes from the frame. Baby Trend lists several Expedition Jogger JG94 manual variants, so if your folding controls look different, match your exact model to the manufacturer’s manual before forcing anything.
Quick Answer
For the standard Baby Trend Expedition JG94 trigger-fold design, remove your child, close the canopy, recline the seat, and pull both trigger folds simultaneously. When the frame releases, let go of the triggers and press down on the stroller handle until the stroller is fully folded. Secure it by locking the fold latch on the right side over the frame rivet.
Key Takeaways
- The current JG94 folding sequence uses two trigger folds that are pulled at the same time.
- Close the canopy and recline the seat before releasing the fold mechanism.
- Press the handle downward only after the fold latches release.
- Secure the folded stroller with the right-side fold latch over the frame rivet.
- If your controls do not match this description, check the manual for your exact Expedition model instead of forcing the frame.
At a Glance
| Model Focus | Baby Trend Expedition Jogger JG94 series; exact controls can vary by model code |
| Fold Control | Two trigger folds pulled simultaneously on current standard JG94 manuals |
| Final Lock | Right-side fold latch secured over the protruding frame rivet |
| Current Standard Folded Size | 24 in × 33.5 in × 15.5 in; other Expedition variants may differ |
| Current Standard Item Weight | 24 lb; check your exact model if weight matters for lifting or travel |
Source check: Baby Trend lists multiple Expedition Jogger manuals on its official product-manual page. The folded dimensions and item weight above come from the current standard Expedition Jogger product page.
What to Know Before You Fold
The most important detail is identifying the correct fold control for your exact Expedition model. Current standard JG94 manuals show two trigger folds that are pulled at the same time. They also tell you to close the canopy and recline the seat before releasing the frame.
After the triggers release the fold latches, the handle begins to move toward the floor. Release the triggers, press downward on the handle until the stroller is fully folded, then secure the right-side fold latch over the frame rivet. Do not substitute a different Baby Trend stroller or wagon folding method just because the products share the Expedition name.
Warning: Remove your child before folding and keep children and fingers away from the moving frame and hinge points. Baby Trend specifically warns about finger entrapment while folding and unfolding the stroller.
How to Fold Baby Trend Expedition Jogger Stroller
Start with the stroller on a stable, flat surface and remove your child. Clear any bulky item that could interfere with the moving frame. Close the canopy by pulling its front edge backward, then recline the seat by releasing the seat-back buckle.
Find the two trigger folds near the handle and frame. Pull both triggers at the same time. When the fold latches release, the handle will begin to move toward the floor. Release the triggers, then press downward on the stroller handle until the frame is completely folded.
Finish by finding the fold latch on the right side of the stroller and locking it over the rivet that protrudes from the frame. This mechanical latch—not an assumed audible click—is what holds the standard JG94 stroller in its folded position. If your stroller does not have this trigger-and-latch arrangement, check your exact model on Baby Trend’s official manual page before continuing.
Step-by-Step Folding Instructions
Follow the sequence below for a standard Baby Trend Expedition JG94 trigger-fold stroller. The preparation steps matter because the manufacturer instructs you to close the canopy and recline the seat before releasing the folding mechanism.
Before You Fold
Prepare the stroller before touching the fold triggers.
- Remove your child: Never fold the stroller with a child in or next to the moving frame.
- Clear obstructions: Remove bulky bags, blankets, toys, or other items that could catch between the folding frame sections.
- Close the canopy: Pull the front edge of the canopy backward into its closed position.
- Recline the seat: Release the seat-back buckle so the seat is reclined as directed by the JG94 folding instructions.
- Keep the stroller steady: Work on a flat surface and keep your hands away from hinge points.
Finding the Fold Triggers
The current JG94 folding instructions use two trigger folds rather than two generic red buttons. Look near the areas where the handle meets the folding frame. If your stroller has a different release control, stop and match its model code with the official Baby Trend manual instead of forcing the handle.
| Step | Action | Result |
|---|---|---|
| 1 | Locate both trigger folds | Identifies the JG94 fold-release controls |
| 2 | Pull both triggers simultaneously | Releases the folding latches |
| 3 | Release the triggers and press the handle downward | Collapses the frame into its folded position |
Folding Mechanism Steps
Once the canopy is closed and the seat is reclined, use this sequence:
- Stand behind the stroller: Keep control of the handle while the frame begins to move.
- Pull both trigger folds: Pull the left and right triggers at the same time.
- Let the handle begin to lower: The handle starts moving toward the floor after the fold latches release.
- Release the triggers: You do not need to keep holding them once the frame has released.
- Press the handle downward: Continue until the stroller is completely folded.
- Lock it closed: Place the right-side fold latch over the rivet protruding from the frame.
Removing a wheel is not part of Baby Trend’s normal JG94 folding sequence. If you need a smaller package for a tight trunk or storage area, check your exact manual before removing any wheel because wheel attachment systems can vary by Expedition model.
Pro Tip: Before a trip, practice the complete sequence once at home: canopy closed, seat reclined, both triggers pulled together, handle pressed down, and right-side latch secured. That makes it easier to recognize whether the stroller is folding normally.
Common Mistakes to Avoid
The most common folding problems come from using the wrong release controls, skipping the seat-recline step, or trying to force the frame before both trigger folds have released the latches.
Looking for the Wrong Release Controls
Do not assume every Expedition has two red buttons on the handlebar. Current standard JG94 manuals show a dual-trigger fold. If you cannot find two trigger folds that match your stroller, confirm the exact model before continuing.
For the trigger-fold design:
- Find both triggers: Locate one fold trigger on each side.
- Pull them together: Both triggers must release the frame at the same time.
- Wait for the frame to release: The handle should begin moving toward the floor.
- Then press the handle down: Do not force it before the fold latches release.
Improper Latch Check
The standard JG94 fold latch is on the right side of the stroller. Once the stroller is fully collapsed, lock that latch over the rivet protruding from the frame. Do not assume the stroller is secure merely because the frame looks compact.
If the latch will not reach or sit correctly over the rivet, unfold the stroller carefully and repeat the fold evenly. Check that the canopy is closed, the seat is reclined, and nothing is trapped between the folding frame sections.
Folding With Items in the Basket
Baby Trend’s fold instructions focus on the canopy, seat, triggers, and latch, but bulky items can still physically obstruct a folding frame. Remove bags, blankets, toys, and other large items if they interfere with movement. Do not force the stroller around an obstruction.
Forcing a Stuck Fold
If the stroller does not begin folding after both triggers are pulled, stop. Recheck that the canopy is closed and the seat is reclined. Look for straps, fabric, dirt, or stored items blocking the hinge area. If the controls or frame appear damaged, discontinue use and follow Baby Trend’s model-specific support instructions rather than applying more force.
Tips for Safe Folding
Folding moves several frame sections at once, so keep your child away from the stroller while the mechanism is being released. Baby Trend warns specifically about finger entrapment during folding and unfolding.
Close the canopy, recline the seat, keep children and fingers clear of the frame, then operate both fold triggers together.
Use these safety checks:
- Remove your child first: Never operate the fold mechanism with your child in the stroller.
- Keep children away: Do not let a child stand next to the moving frame while you fold or unfold it.
- Keep fingers clear: Stay away from hinges, joints, and the folding latch as the frame moves.
- Control the handle: The handle starts moving toward the floor after the fold latches release.
- Secure the folded frame: Lock the right-side fold latch over the frame rivet before lifting or storing the stroller.
Before every use, also inspect the stroller for damaged hardware, loose joints, missing parts, worn material, or other damage. Stop using it if the stroller malfunctions or a locking part does not work correctly.
Stroller Maintenance for Longevity
Simple cleaning and inspection can keep the frame and fold mechanism easier to operate. Baby Trend recommends checking the stroller regularly for loose screws, worn parts, torn material, damaged stitching, and other problems.
For models with air-filled tires, check the pressure before use and follow the PSI marked on the tire itself. Current JG94 instructions specify using a hand pump and warn against using an air compressor or exceeding the maximum pressure printed on the tire sidewall.
For cleaning, use mild household soap or detergent with warm water on a sponge or clean cloth. Remove dirt and grit around the frame before storage, and let wet fabric and metal parts dry thoroughly.
If the folding mechanism remains stiff after visible dirt is removed, or if a trigger, frame latch, or fold latch is damaged, do not improvise a repair or lubricant treatment. Stop using the stroller and follow the model-specific Baby Trend service guidance.
Note: Mud, sand, and road grit can collect around moving parts. Clean visible debris before storage so it is easier to inspect the hinges and latch areas the next time you use the stroller.
Do All Baby Trend Expedition Models Fold the Same Way?
No. “Expedition” is used across more than one Baby Trend product and manual variant. Baby Trend currently lists several Expedition Jogger JG94 manuals as well as Expedition Double Joggers, Race Tec models, Zero Flat models, and Expedition stroller wagons.
This guide focuses on the standard JG94 dual-trigger fold documented in current Expedition Jogger manuals. If your stroller has a central release control, a different safety lock, a wagon-style frame, or another mechanism that does not match these steps, do not try to adapt this procedure. Find the exact model on the Baby Trend instruction-manual page and follow that version.
Storage Options After Folding
The current standard Expedition Jogger product page lists folded dimensions of 24 inches × 33.5 inches × 15.5 inches and an item weight of 24 pounds. Those figures are useful when measuring a trunk, closet, or storage shelf, but other Expedition variants can have different folded dimensions and weights.
Before lifting the folded stroller, make sure the right-side fold latch is secured over the frame rivet. Use both hands when lifting if that gives you better control. If your exact model allows a wheel to be removed and you need extra room, follow the wheel-removal instructions in its own manual rather than improvising.
Common storage spots include:
- Vehicle trunk: Measure the opening and cargo area against your exact stroller’s folded dimensions.
- Garage or mudroom: Keep the stroller dry and away from standing water or corrosive dirt.
- Closet: Make sure the folding latch is secured before placing or leaning the stroller in a tight space.
- Travel storage: Check airline or transport requirements separately because baggage rules are not part of the stroller’s folding instructions.
The fold latch keeps the frame closed during normal handling, but inspect the latch if the stroller has ever opened unexpectedly during transport.
Related Resources for Your Baby Trend Stroller
You do not need to buy an accessory to fold a standard Expedition Jogger. The most useful resources are the documents that match your exact model.
- Official Baby Trend manuals: Use the Baby Trend product-manual index to match the JG94 or other model code printed on your stroller or paperwork.
- Current Expedition specifications: The current Expedition Jogger product page lists folded dimensions, weight, recommended use, and current car-seat compatibility.
- Model-specific support: If a trigger, latch, wheel, or frame joint appears damaged, use Baby Trend’s support information for the exact stroller rather than substituting instructions from another Expedition product.
Accessory compatibility can change between versions. Confirm trays, infant seats, bases, wheels, and replacement parts against your exact model before buying or installing them.
Troubleshooting Folding Problems
If your Baby Trend Expedition JG94 does not fold smoothly, work through the folding sequence again before assuming the frame is broken.
- The stroller will not release: Confirm the canopy is closed, the seat is reclined, and both trigger folds are being pulled at the same time.
- The handle does not start moving: Do not force it. Recheck both triggers and inspect the hinge area for an obstruction.
- The frame stops halfway: Look for straps, fabric, toys, bags, or debris caught between moving frame sections.
- The fold latch will not secure: Open the stroller carefully, refold it evenly, then place the right-side fold latch over the protruding frame rivet.
- Your controls look different: Verify the model because another Expedition version may use a different folding mechanism.
- The stroller opens during transport: Inspect the fold latch and rivet. Stop carrying it folded if the latch is damaged or will not stay secured.
If the stroller still will not fold correctly, discontinue forcing the mechanism. Use the model-specific instruction manual or contact Baby Trend customer service for repair or replacement guidance.
How Do You Unfold a Baby Trend Expedition Stroller?
For the standard JG94 design, place the folded stroller on the ground with all three wheels touching the surface. Release the folding latch on the right side. Then lift the stroller handle with both hands until the frame is fully upright and locked in its open position.
The stroller has spring-loaded latches on both sides of the frame. Before placing your child in the stroller, check that both latches are fully engaged. If either side is loose or the frame will not remain rigidly open, do not use the stroller until the locking problem is resolved.
If you are comparing the Expedition with other strollers rather than only learning the fold, see our guides to strollers for rough sidewalks and strollers for long walks.
Related Guides
Frequently Asked Questions
Can the stroller be folded with a child inside?
No. Remove your child before folding and keep children away from the moving stroller frame. Baby Trend warns that fingers can become trapped during folding and unfolding.
What should I do if the folding mechanism is stuck?
Do not force it. Make sure the canopy is closed, the seat is reclined, and both trigger folds are being pulled simultaneously. Then check for straps, fabric, stored items, dirt, or damage blocking the frame.
Do I need to recline the seat before folding the Expedition Jogger?
Yes for the standard JG94 procedure documented by Baby Trend. Close the canopy and recline the seat by releasing the seat-back buckle before pulling both fold triggers.
Can the stroller be folded with one hand?
The standard JG94 trigger-fold procedure requires both fold triggers to be pulled at the same time, so plan on using both hands. If your Expedition has different controls, follow the manual for that exact model.
How do I clean the stroller before folding it?
Remove loose dirt and debris, then use mild household soap or detergent with warm water on a sponge or clean cloth. Let wet areas dry and inspect the hinges and latches before storage.
Why will my Baby Trend Expedition Stroller not stay folded?
On the standard JG94, the right-side fold latch must be locked over the rivet that protrudes from the frame. If it will not stay secured, inspect the latch and frame for misalignment or damage and stop transporting it folded until the problem is resolved.
How small is the Baby Trend Expedition Jogger when folded?
Baby Trend’s current standard Expedition Jogger product page lists folded dimensions of 24 inches by 33.5 inches by 15.5 inches. Other Expedition versions can differ, so confirm the specification for your exact model before measuring trunk or storage space.
Conclusion
For a standard Baby Trend Expedition JG94, the correct fold sequence is simple once you know the controls: close the canopy, recline the seat, pull both trigger folds simultaneously, release them when the frame unlocks, and press the handle downward until the stroller is fully folded. Then secure the right-side fold latch over the frame rivet.
If your stroller does not match that trigger-fold layout, do not force it. Baby Trend uses the Expedition name across several models and manual variants, so confirm the model-specific instructions first. When unfolding, remember to verify that both spring-loaded frame latches are fully engaged before placing your child in the stroller.
