BAKFlip Tonneau Cover Review: MX4 vs G2 vs F1 vs Revolver X4s – Which to Buy

Quick Answer

BAKFlip, made by BAK Industries (a RealTruck brand), is the best-known hard-folding tonneau line. The MX4 is the one to buy for most trucks: aluminum panels with a matte, scratch-resistant finish, a sealed hinge design, 400-lb distributed load rating and a lifetime warranty. The G2 is the older glossy-aluminum version at a lower price, the F1 adds a fiberglass-reinforced top for a premium finish, and the Revolver X4s is BAK’s hard roll-up with full bed access. All fold or roll to the cab, lock with the tailgate and install with clamps in under an hour.

Key Takeaways

  • MX4: matte aluminum, 400-lb rating, integrated rail seals, EZ-fold latches; the default BAKFlip.
  • G2: gloss aluminum, same mechanism as older BAKFlips, cheaper; shows scratches more.
  • F1: fiberglass-reinforced polymer top over aluminum; smoothest look, highest price among folds.
  • FiberMax: fiberglass skin on aluminum with a textured finish; alternative to F1.
  • Revolver X4s: hard aluminum slat roll-up; full bed access without a stack at the cab.
  • Lifetime warranty on all; fit lists cover almost every pickup from 2000s onward.

BAKFlip is the brand against which other hard-fold covers are measured, and its range has grown into several models with overlapping prices. The right choice depends on whether you want a matte or gloss finish, how much you care about a fiberglass top, and whether a roll-up suits your loading better than a fold. This review compares the current BAKFlip models, explains the construction differences that justify the price, and recommends a model for each kind of owner. Prices vary by truck and retailer; use the relative positions rather than fixed numbers.

BAKFlip Models Compared

Model Type Top surface Load rating (closed) Bed access Price position
MX4 Hard quad-fold Matte powder-coated aluminum 400 lb distributed Full (stands at cab) Mid-high
G2 Hard quad-fold Gloss aluminum 300 lb Full Mid
F1 Hard quad-fold Fiberglass-reinforced polymer over aluminum 400 lb Full High
FiberMax Hard quad-fold Textured fiberglass over aluminum 400 lb Full High
Revolver X4s Hard roll-up Matte aluminum slats with vinyl 400 lb Full (rolls to cab) High
HD (select trucks) Hard fold, heavy duty Thick aluminum Higher Full High

MX4: The One Most People Should Buy

The MX4 took the BAKFlip mechanism and gave it a matte, textured powder coat that hides scratches and fingerprints, thicker aluminum panels rated to 400 lb when closed, and rail seals and drain tubes integrated into the frame so water that gets past the panels drains out the front corners rather than into the bed. The EZ-fold latches release from the tailgate and the cover folds forward in three motions to stand against the cab, held by prop rods, so the full bed is usable. It locks with the tailgate and, on trucks with a locking tailgate, that is the only lock you need. Installation is clamp-on with no drilling. For a daily-driven truck that sees weather and the occasional load on top, it is the best balance in the line.

G2: The Value BAKFlip

The G2 is the previous generation design in gloss-finished aluminum. It folds, locks and seals the same way, with a slightly lower load rating and a surface that shows scratches and dirt more than the MX4’s matte. It costs noticeably less and remains a well-made cover; if the budget is tight and you can live with the glossy look, it is a reasonable way to get BAKFlip quality.

F1 and FiberMax: Premium Finishes

The F1 bonds a fiberglass-reinforced polymer skin to aluminum panels, giving a smooth, almost painted look that resists dents and UV better than bare aluminum. The FiberMax uses a textured fiberglass skin for a different appearance with the same benefits. Both carry the 400-lb rating and the lifetime warranty, and both cost more than the MX4. They suit owners who want the cover to look like part of the truck and will pay for it; functionally they are MX4s with nicer tops.

Revolver X4s: The Roll-Up Alternative

Not everyone wants a stack of panels against the cab. The Revolver X4s uses rigid aluminum slats bonded to vinyl that roll up into a canister-free bundle at the cab, leaving the whole bed open with a lower profile than a folded cover and no prop rods. It locks at the tailgate, seals well and carries the same 400-lb rating. It is the choice for owners who load tall items often, use a bed rack or simply prefer a roll. The X4s is slightly more effort to open than a fold and costs more.

Fit and Installation

BAK publishes one of the broadest fit lists in the industry: F-150, Super Duty, Silverado, Sierra, Ram (including RamBox-compatible versions), Tundra, Tacoma, Titan, Frontier, Colorado, Canyon, Ranger, Maverick, Gladiator, Ridgeline, Lightning, Cybertruck and more, by bed length and rail system. The cover clamps to the bed rails in 30–60 minutes; some trucks need the included rail adapters, and bed-rail caps may need trimming. BAK’s instructions are clear and the clamps hold through winter.

Warranty and Ownership

BAKFlip covers carry a limited lifetime warranty on the cover and mechanism, with a shorter term on finish and seals. Maintenance is minimal: keep the drain tubes clear, silicone the seals once a year, and tighten clamps if they loosen. Resale value is strong; a used MX4 sells readily to owners of the same truck. Compared with Worksport, Bison and Tyger, BAKFlip costs more and delivers thicker panels, better latches, cleaner drainage and the warranty; compared with Retrax and Roll-N-Lock retractables, it is cheaper and lighter but stacks at the cab.

Which BAKFlip to Buy

  • Most owners: MX4.
  • Budget: G2.
  • Best appearance: F1 or FiberMax.
  • Prefer a roll-up, no stack at the cab: Revolver X4s.
  • Heavy loads on the cover: HD where offered for your truck.

Frequently Asked Questions

What is the difference between BAKFlip MX4 and G2?

The MX4 has thicker panels with a matte, scratch-resistant finish, a 400-lb load rating and integrated rail seals; the G2 is the older gloss-aluminum design with a 300-lb rating at a lower price.

Is the BAKFlip F1 worth it over the MX4?

Only if you want the smoother fiberglass-reinforced finish. The F1 and MX4 share the mechanism, load rating and warranty; the F1 costs more for appearance and dent resistance.

Can you stand on a BAKFlip?

No. The MX4, F1 and X4s are rated for 400 pounds evenly distributed across the closed cover, not for a concentrated load like a person standing.

Does BAKFlip have a lifetime warranty?

Yes, a limited lifetime warranty on the cover and mechanism, with shorter coverage on the finish and seals.

Is the BAKFlip Revolver X4s better than the MX4?

It is different: a hard roll-up that leaves no stack at the cab, which suits owners who load tall items or use bed racks. The MX4 is simpler to open and costs less.

Conclusion

BAKFlip earns its reputation with thick panels, good drainage and a lifetime warranty, and the MX4 is the version that gets the balance right for most trucks. Choose the G2 to save money, the F1 or FiberMax for the finish, and the Revolver X4s if a roll-up fits how you load. Whichever you pick, confirm the fit for your bed length and rail system before ordering, because the cover is only as good as its seal on your truck.

Related reading

Sharing Is Caring:
About the Author

Tony B. Hensel is the founder and lead author of GoMyReview.com, a trusted source for honest, hands-on product reviews and buyer’s guides. With over 10 years of experience in consumer research and a background in journalism, Tony combines clarity, accuracy, and real-world testing to help readers make smarter buying decisions.

Before starting GoMyReview.com, Tony worked as a freelance tech writer, contributing to online publications and staying current with trends in home gadgets and electronics. Today, he leads a small team of reviewers, ensuring every article is practical, unbiased, and easy to follow.

At GoMyReview, Tony personally covers kitchen appliances and cookware, home décor and furniture, cleaning and home improvement, camping and outdoor gear, clothing, welding and workshop tools, and automotive parts and accessories, while specialist authors handle drones, fishing and outdoor safety, and baby gear.

When he’s not writing, Tony enjoys home cooking, photography, and DIY projects. Based in the Midwest, he brings personal passion and professional integrity to every review—so readers can shop with confidence.

Leave a Comment