If you need a trailer hitch for a Toyota Tacoma, start with your truck’s model year and factory receiver setup, not the biggest capacity number on the product page. This guide compares 10 Class 3 and Class 4 receiver hitches for 1995–2023 Tacoma models, with options for towing, bike racks, cargo carriers, utility trailers, and other compatible 2-inch hitch accessories.
Important: This roundup covers Toyota Tacoma models from 1995 through 2023. The Tacoma was completely redesigned for 2024, so owners of 2024 and newer fourth-generation trucks should use a hitch specifically listed for that generation.
Last updated: September 12, 2026. Fitment, product specifications, Amazon availability, ratings, and review counts can change. Always confirm your exact year, cab/bed configuration, factory receiver status, vehicle tow rating, and the manufacturer’s current installation instructions before buying or towing.
Affiliate disclosure: This roundup is reader-supported. When you click through qualifying Amazon links, we may earn a referral commission at no extra cost to you.
Towing Safety Comes Before Hitch Capacity
A receiver hitch’s published rating does not increase your Tacoma’s towing capacity. Your safe limit is controlled by the lowest-rated relevant component or limit, including the truck, hitch, ball mount, hitch ball, trailer, tires, payload, tongue-weight limit, and other towing equipment. Check your exact Tacoma owner’s manual before towing.
Quick Verdict
For 2016–2023 Tacomas: Draw-Tite 75238 and CURT 13264 have the clearest current manufacturer documentation. Rigid Hitch R3-0517 is another strong Class IV option, while HD Ridez is worth considering when you want a simpler value-oriented alternative.
For 2005–2015 Tacomas: APS and HECASA provide vehicle-specific 2-inch receiver options. Verify the live listing and your exact truck configuration before ordering.
For 1995–2004 Tacomas: CURT 13013 has the strongest current manufacturer documentation in this group. Kojem and KUAFU are lower-cost alternatives for buyers who carefully verify the live listing before installation.
Best buying rule: Match fitment first. Compare hitch rating second. Never choose a receiver only because its published number is higher.
Top Picks
|
Category |
Product |
Fitment Focus |
|---|---|---|
|
🏆 Best Documented Overall |
2016–2023 Tacoma |
|
|
⚡ Strong Class 3 Pick |
2016–2023; excludes factory receiver |
|
|
🚀 Class 4 Alternative |
Current manufacturer catalog: 2016–2023 |
|
|
💡 Value Pick for Later Tacomas |
2016–2023 Tacoma |
|
|
🔧 Alternative for 2016–2022 |
Manufacturer lists 2016–2022 |
|
|
💰 2005–2015 Value Pick |
2005–2015 Tacoma |
|
|
🎯 2005–2015 Alternative |
2005–2015 Tacoma |
|
|
🏆 Best Documented First-Gen Pick |
1995–2004 Tacoma |
|
|
🎯 Older Tacoma Value Pick |
1995–2004 Tacoma |
|
|
⚙️ First-Gen Alternative |
1995–2004 Tacoma |
How These Toyota Tacoma Hitches Were Compared
The most important factor is vehicle compatibility. After fitment, the comparison considers receiver class, 2-inch accessory compatibility, published gross trailer weight and tongue-weight ratings where those figures could be verified, installation requirements, corrosion-resistant finishes, included hardware, and the strength of available manufacturer documentation.
Products with clear current documentation from established hitch manufacturers receive stronger recommendations than products whose specifications rely mainly on marketplace listings. That does not automatically make a private-label hitch unsuitable, but it does mean you should verify its current instructions and ratings more carefully before towing.
Before You Buy
- Confirm your exact Tacoma model year before choosing a hitch.
- Check whether your truck already has a factory receiver; some aftermarket hitches specifically exclude factory-receiver models.
- Confirm cab, bed, bumper, frame, and trim restrictions in the current manufacturer fit guide.
- Compare the hitch rating with the towing and tongue-weight limits in your Tacoma owner’s manual.
- Do not assume a Class 4 hitch allows your truck to tow more than Toyota permits.
- Check whether the ball mount, hitch ball, pin, clip, lock, wiring harness, safety chains, and brake controller are included or sold separately.
- Use a helper, floor jack, or safe support method when lifting a heavy receiver into position.
- Follow the hitch manufacturer’s exact torque specifications and installation sequence.
Fitment and Compatibility Note
Tacoma hitch fitment changes substantially by generation. The products in this article fall into three groups: 1995–2004, 2005–2015, and 2016–2023. A hitch from one group should not be assumed to fit another generation. The 2024-and-newer Tacoma uses a redesigned platform and is outside this roundup.
Fitment information can also change as manufacturers update application guides. Use this article as a shortlist, then confirm the live Amazon vehicle checker and the hitch manufacturer’s instructions before ordering.
Kojem Class 3 2″ Receiver
The Kojem is aimed at older Tacoma owners who want a standard 2-inch receiver without moving to a custom-fabricated setup. Its vehicle-specific listing and conventional Class 3 format make it useful for compatible bike racks, cargo carriers, and towing equipment.
The main reason to choose it over a more established brand is value. The tradeoff is that product documentation is less comprehensive than the current CURT documentation for the same Tacoma generation. Confirm the current Kojem listing, hardware, installation instructions, and your truck’s towing limits before loading it.
Buyer Feedback Snapshot
The source article’s buyer feedback emphasized build quality and straightforward fit. Because marketplace reviews change, treat the chart below as a historical snapshot and check the live Amazon page for current feedback.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Maintenance |
Easy |
|
Fit verification |
Easy, if model year is confirmed first |
What It Solves
It adds a conventional 2-inch receiver to compatible first-generation Tacomas, giving you a mounting point for appropriate hitch accessories and towing equipment.
Top Benefits
- Listed specifically for 1995–2004 Toyota Tacoma
- Standard 2-inch Class 3 receiver format
- Powder-coated steel construction
- Published marketplace rating of 5,000 lb GTW and 500 lb TW for the hitch itself
Check Product Details on Amazon
APS Class 3 2-Inch Receiver Hitch
Current marketplace information supports 2005–2015 Tacoma fitment and identifies this as a Class 3 receiver made from carbon steel. That makes it relevant for buyers who need a generation-specific receiver rather than a universal hitch.
The biggest limitation is documentation depth. Before towing, verify the live APS listing for the current hitch rating, tongue-weight limit, supplied hardware, and installation instructions instead of assuming those details from another Class 3 receiver.
Buyer Feedback Snapshot
The original source used a small review sample. Treat the image below as a source snapshot rather than a current measure of product quality, and check Amazon for the latest feedback.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Maintenance |
Easy |
|
Fit confirmation |
Easy, once exact model year is confirmed |
What It Solves
This hitch gives compatible 2005–2015 Tacomas a standard receiver for hitch-mounted accessories and properly rated towing equipment.
Top Benefits
- Listed for 2005–2015 Toyota Tacoma
- 2-inch Class 3 receiver
- Vehicle-specific design
- Carbon-steel construction according to current marketplace information
Check Product Details on Amazon
HD Ridez Class 3 2-Inch Hitch
Current marketplace information identifies the HD Ridez receiver as a Class 3 hitch for 2016–2023 Toyota Tacoma models, using heavy-duty carbon-steel construction and a powder-coated finish.
The fitment is attractive for third-generation owners, but the current independent documentation available for exact towing and tongue-weight figures is weaker than the documentation for CURT and Draw-Tite. Verify those numbers on the live product page and installation manual before using the hitch for towing.
Buyer Feedback Snapshot
The original source used a very small review sample. The chart is retained as part of the source article, but it should not be treated as a current product-rating summary.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Maintenance |
Easy |
What It Solves
It provides compatible third-generation Tacomas with a 2-inch receiver for properly matched hitch accessories and towing equipment.
Top Benefits
- Current marketplace fitment lists 2016–2023 Tacoma
- Class 3 2-inch receiver
- Carbon-steel construction
- Powder-coated finish
Check Product Details on Amazon
Rigid Hitch Class 4 R3-0517
R3-0517 is one of the better-documented heavy-duty choices in this roundup. Its current application catalog extends fitment through 2023, although older Amazon-facing product titles may show a narrower year range. Confirm that the exact R3-0517 listing matches your truck before ordering.
The hitch itself is published at 7,000 lb gross trailer weight and 700 lb tongue weight in weight-carrying mode, and 8,000/800 lb with an appropriate weight-distribution setup. Those are hitch ratings only; your Tacoma may have a substantially lower towing or tongue-weight limit.
Buyer Feedback Snapshot
The source feedback emphasized solid fit and the physical weight of the receiver during installation. A floor jack or helper can make alignment safer and easier.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Fitment verification |
Easy with part number R3-0517 |
|
Maintenance |
Easy |
What It Solves
It gives compatible 2016–2023 Tacomas a documented Class IV 2-inch receiver for towing and hitch-mounted accessories while retaining a vehicle-specific bolt-on approach.
Top Benefits
- Current manufacturer catalog lists 2016–2023 Tacoma
- Class IV 2-inch receiver
- Published 7,000-lb GTW / 700-lb TW hitch rating in weight-carrying mode
- Published 8,000-lb / 800-lb weight-distributing hitch rating
- No drilling listed in the installation instructions
Check Product Details on Amazon
Stehlen Class 3 Tacoma Hitch
This Stehlen receiver is relevant for third-generation Tacoma buyers who want a 2-inch Class 3 hitch. The most important correction is model-year coverage: the current manufacturer page says 2016–2022, even though some marketplace listings have advertised 2016–2023.
If you own a 2023 Tacoma, verify fitment directly with Stehlen before buying or choose a receiver with explicit current 2023 manufacturer coverage. Also confirm the current towing and tongue-weight specifications instead of relying on older marketplace copy.
Buyer Feedback Snapshot
The source feedback suggests that bolt placement can require patience during installation. That is useful installation context, but current reviews should still be checked on Amazon.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Fitment verification |
Requires extra care for 2023 claims |
|
Maintenance |
Easy |
What It Solves
It provides a 2-inch Class 3 attachment point for compatible 2016–2022 Tacomas that need an aftermarket receiver.
Top Benefits
- Manufacturer lists 2016–2022 Toyota Tacoma
- Class 3 2-inch receiver
- Compatible with common 2-inch-shank accessories
- Installation hardware is listed as included by the manufacturer
Check Product Details on Amazon
CURT 13013 Class 3 Hitch
CURT currently lists 13013 for all 1995–2004 Toyota Tacoma models. The receiver is rated by CURT for 5,000 lb gross trailer weight and 500 lb tongue weight in standard weight-carrying use, with 6,000/600 lb ratings when used with a compatible weight-distribution system.
CURT also lists no drilling, included installation hardware, a 2-inch receiver, and corrosion protection using liquid A-coat plus black powder coat. Those details make it one of the easier products in this roundup to evaluate from manufacturer documentation.
Buyer Feedback Snapshot
The source reviews emphasized good fit but noted that bumper work and bolt alignment can make installation more involved than simply lifting the hitch into place.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate to advanced |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Fitment verification |
Easy |
|
Maintenance |
Easy |
What It Solves
It gives 1995–2004 Tacoma owners a documented, vehicle-specific 2-inch receiver for compatible towing and carrying accessories.
Top Benefits
- Manufacturer-confirmed 1995–2004 Tacoma fitment
- 5,000-lb GTW / 500-lb TW published weight-carrying hitch rating
- 6,000-lb / 600-lb published weight-distributing hitch rating
- No drilling listed
- SAE J684 testing stated by CURT
Check Product Details on Amazon
KUAFU Class 3 Trailer Hitch
The KUAFU listing targets 1995–2004 Toyota Tacoma models and provides a standard 2-inch Class 3 receiver format. That makes it relevant for the article and for first-generation owners who want an alternative to CURT or Kojem.
Because current manufacturer-level documentation is limited, verify the live Amazon listing for the exact hitch rating, weight-distribution compatibility, supplied hardware, and installation requirements before towing.
Buyer Feedback Snapshot
The source feedback focused on factory-hole alignment and general build quality. Check the current product page for newer reviews and any updated installation notes.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Fitment verification |
Easy by year, but verify current listing |
|
Maintenance |
Easy |
What It Solves
It gives compatible 1995–2004 Tacomas a conventional 2-inch receiver for appropriate hitch accessories and properly matched towing equipment.
Top Benefits
- Listed for 1995–2004 Toyota Tacoma
- 2-inch Class 3 format
- Powder-coated steel construction according to the source listing
- Alternative for buyers comparing several first-generation receivers
Check Product Details on Amazon
CURT 13264 Class 3 Hitch
CURT currently lists 13264 for 2016–2023 Tacoma models that do not have the factory receiver. It carries a published 6,000-lb GTW and 900-lb TW weight-carrying hitch rating, with an 8,000-lb WD and 900-lb WDTW rating when used with an appropriate weight-distribution system.
Its no-drill listing, included hardware, current manufacturer fitment table, and documented testing make it one of the easiest products here to evaluate. The biggest buying mistake would be ordering it for a Tacoma that already has the factory receiver.
Buyer Feedback Snapshot
The source feedback repeatedly mentioned that fishing carriage bolts and spacers can be the slowest part of the installation. A jack or helper can make positioning much easier.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Fitment verification |
Easy, but factory receiver status is critical |
|
Maintenance |
Easy |
What It Solves
It adds a documented 2-inch Class 3 receiver to compatible third-generation Tacomas that were not equipped with the factory receiver.
Top Benefits
- Manufacturer-confirmed 2016–2023 fitment excluding factory-receiver models
- 6,000-lb GTW / 900-lb TW published weight-carrying hitch rating
- 8,000-lb / 900-lb published weight-distributing hitch rating
- No drilling listed
- SAE J684 testing stated by CURT
Check Product Details on Amazon
HECASA Class 3 Hitch
Current marketplace specifications list this HECASA receiver for 2005–2015 Tacoma, with automotive-grade steel construction, a 2-inch Class 3 receiver, and a 5,000-lb maximum hitch towing rating.
Its physical weight makes installation a job where a helper, jack, or secure support is useful. As with every hitch here, the 5,000-lb figure describes the hitch—not permission for every compatible Tacoma to tow 5,000 lb.
Buyer Feedback Snapshot
The source feedback focused on the receiver’s heavy construction and the challenge of aligning the square spacers during installation.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Fitment verification |
Easy by listed year range |
|
Maintenance |
Easy |
What It Solves
It adds a 2-inch receiver to compatible 2005–2015 Tacomas for properly matched towing equipment and hitch-mounted accessories.
Top Benefits
- Listed for 2005–2015 Toyota Tacoma
- 2-inch Class 3 receiver
- Published 5,000-lb maximum hitch towing rating
- Automotive-grade steel construction according to current marketplace specifications
- Powder-coated finish
Check Product Details on Amazon
Draw-Tite 75238 Class 4 Hitch
Draw-Tite currently confirms 75238 for 2016–2023 Toyota Tacoma. It is a Class IV 2-inch receiver with solid all-welded steel construction, no-drill installation, included mounting hardware, and a black powder-coat-over-E-coat finish.
The hitch is rated up to 7,000 lb GTW and 1,050 lb TW in weight-carrying mode, and 8,000/1,200 lb with an appropriate weight-distribution setup. These figures describe the receiver hitch. Your actual towing limit can be lower based on Tacoma year, engine, drivetrain, trim, payload, and Toyota’s requirements.
Buyer Feedback Snapshot
The source feedback frequently mentioned good frame alignment and straightforward bolt-up installation, while also noting that supporting the receiver with blocks or a jack can help if you install it without a second person.
Ease Of Use
|
Feature |
Ease Level |
|---|---|
|
Installation |
Moderate |
|
Daily accessory hookup |
Easy |
|
Towing setup |
Moderate |
|
Fitment verification |
Easy |
|
Maintenance |
Easy |
What It Solves
It provides a well-documented Class IV receiver for compatible 2016–2023 Tacomas, making it a strong shortlist option for buyers who want both towing capability and support for common 2-inch hitch accessories.
Top Benefits
- Manufacturer-confirmed 2016–2023 Tacoma fitment
- Class IV 2-inch receiver
- 7,000-lb GTW / 1,050-lb TW published weight-carrying hitch rating
- 8,000-lb / 1,200-lb published weight-distributing hitch rating
- No drilling and mounting hardware included
- SAE J684 testing stated by Draw-Tite
Check Product Details on Amazon
FAQ
How Do I Choose The Right Hitch For My Tacoma?
Start with the model year. This roundup separates into 1995–2004, 2005–2015, and 2016–2023 fitment groups. Do not assume that a hitch that fits one Tacoma generation will bolt onto another.
Next, check whether your truck already has a factory receiver. For example, CURT 13264 is specifically listed for 2016–2023 Tacomas excluding the factory receiver. Then compare receiver size, published GTW/TW ratings, installation requirements, and your intended accessory or trailer.
Finally, compare every hitch number with your Tacoma owner’s manual. The receiver’s capacity never overrides Toyota’s vehicle limits.
Class 3 Or Class 4: Which Is Better For A Tacoma?
Neither class is automatically “better.” A Class 4 receiver may have a higher hitch rating, but that extra receiver capacity only matters when the truck, trailer, ball mount, hitch ball, tongue weight, payload, and other equipment also permit the load.
For bike racks, cargo carriers, and lighter towing, a correctly fitted Class 3 receiver may already meet your needs. If you are comparing heavier towing setups, a documented Class 4 option such as Draw-Tite 75238 or Rigid Hitch R3-0517 may provide more receiver capacity, but your Tacoma’s own limit still controls.
Can I Install A Toyota Tacoma Trailer Hitch Myself?
Many of these receivers are designed as bolt-on installations, and several manufacturer-documented choices require no drilling. That does not mean every installation is effortless. Receivers are heavy, and some Tacoma applications require fishing bolts or spacers through the frame or working around bumper components.
Use the exact manufacturer’s instructions, proper sockets, a calibrated torque wrench, safe vehicle support, and a floor jack or helper when needed. If you are uncomfortable with the process, have the hitch installed professionally.
Does A 7,000-Lb Hitch Mean My Tacoma Can Tow 7,000 Pounds?
No. The number on the hitch is the receiver’s rating, not an automatic vehicle towing rating. Your Tacoma may be rated lower depending on model year, engine, drivetrain, cab, bed, tow package, payload, and other factors. Follow the lowest applicable limit.
How Much Tongue Weight Should A Tacoma Trailer Have?
Toyota manuals for relevant Tacoma generations commonly specify conventional-trailer tongue weight at approximately 9% to 11% of gross trailer weight, while also setting configuration-specific maximum tongue-weight limits. Use the instructions and limits in the owner’s manual for your exact truck rather than applying a generic percentage.
Do I Need Trailer Wiring And A Brake Controller?
The receiver hitch itself does not automatically provide trailer-light wiring or trailer-brake control. Depending on your trailer and Tacoma configuration, you may need a 4-way or 7-way wiring connection and a compatible brake controller. Check your trailer’s requirements, state laws, and Toyota’s towing instructions.
Will These Hitches Fit A 2024, 2025, Or 2026 Tacoma?
Do not assume so. Toyota introduced a completely redesigned fourth-generation Tacoma for 2024. This roundup intentionally covers 1995–2023 products. For a 2024 or newer truck, use a receiver specifically documented for the fourth-generation Tacoma.
Buyers Top Picks
Fitment should decide your shortlist before brand or published capacity. For 2016–2023 trucks, Draw-Tite 75238 and CURT 13264 provide the strongest current manufacturer documentation in this lineup, with Rigid Hitch R3-0517 offering another well-documented Class IV route. For 1995–2004 Tacomas, CURT 13013 is the clearest documented choice. APS and HECASA cover the 2005–2015 generation for buyers comparing value-focused alternatives.
Final Recommendation
2016–2023: Start with Draw-Tite 75238 if you want a Class IV receiver with detailed current specifications, or CURT 13264 if you want a Class 3 option and your Tacoma does not have the factory receiver.
2005–2015: Compare APS and HECASA, but confirm the current product instructions and your truck’s exact configuration before ordering.
1995–2004: CURT 13013 is the strongest documented starting point, with Kojem and KUAFU serving as alternative value choices.
Do not buy by capacity number alone. The correct hitch is the one that fits your exact Tacoma and stays within every applicable vehicle and towing-system limit.
Wrapping Up
These 10 Toyota Tacoma trailer hitches cover three major fitment groups from 1995 through 2023. The strongest buying decision comes from matching the receiver to your exact model year first, checking factory-receiver restrictions second, and comparing published hitch ratings only after fitment is confirmed.
If documentation and easy verification matter most, Draw-Tite 75238, CURT 13264, CURT 13013, and Rigid Hitch R3-0517 stand out because their current manufacturer information is comparatively clear. The other receivers remain relevant choices, but their live Amazon specifications deserve an extra fitment and capacity check before towing.
Note: Product listings, compatibility databases, ratings, review totals, and availability can change. Always verify the current Amazon page, manufacturer fit guide, installation instructions, and Toyota owner’s manual before purchasing or towing.
| Product | Image | Fitment | Published Hitch Rating / Verification | Class | Best For |
|---|---|---|---|---|---|
| Kojem Class 3 Trailer Hitch Compatible with 1995-2004 Toyota Tacoma 2″ Receiver Tow Hitch Powder Coated |
 |
1995–2004 Tacoma | Marketplace listing: 5,000 lb GTW / 500 lb TW; verify live listing | Class 3 | Value-focused first-generation option |
| APS Assembly Class 3 Trailer Hitch 2 Inches Receiver Tube Towing Hitch Compatible with Toyota Tacoma 2005-2015 |
 |
2005–2015 Tacoma | Verify current GTW/TW on live listing and instructions | Class 3 | Value-focused second-generation option |
| Trailer Hitch, 2 inch Towing Hitch Receiver with Class 3 Hitch Cover Compatible with Toyota Tacoma 2016-2023 |
 |
2016–2023 Tacoma | Verify current GTW/TW on live listing and instructions | Class 3 | Later-model value option |
| Rigid Hitch Class 4 Trailer Hitch R3-0517 |
 |
Current manufacturer catalog: 2016–2023 Tacoma | 7,000/700 lb WC; 8,000/800 lb WD/WDTW | Class 4 | High-rated documented alternative |
| Stehlen 733469489047 Class 3 Trailer Tow Hitch Receiver 2″ |
 |
Manufacturer currently lists 2016–2022 Tacoma | Verify current GTW/TW with manufacturer | Class 3 | 2016–2022 alternative |
| CURT 13013 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Toyota Tacoma |
 |
1995–2004 Tacoma | 5,000/500 lb WC; 6,000/600 lb WD/WDTW | Class 3 | Best documented first-generation choice |
| KUAFU Class 3 Trailer Hitch Compatible with 1995-2004 Toyota Tacoma |
 |
1995–2004 Tacoma | Verify current GTW/TW on live listing and instructions | Class 3 | Budget-oriented first-gen alternative |
| CURT 13264 Class 3 Trailer Hitch, 2-Inch Receiver, Fits Select Toyota Tacoma |
 |
2016–2023 Tacoma; excludes factory receiver | 6,000/900 lb WC; 8,000/900 lb WD/WDTW | Class 3 | Strong documented Class 3 option |
| HECASA Class 3 Trailer Hitch 2 Inch Receiver Compatible with 2005-2015 Toyota Tacoma |
 |
2005–2015 Tacoma | Marketplace specification: 5,000-lb maximum hitch rating | Class 3 | Second-generation value alternative |
| Draw-Tite 75238 Class 4 Trailer Hitch, 2 Inch Receiver, Compatible with Toyota Tacoma |
 |
2016–2023 Tacoma | 7,000/1,050 lb WC; 8,000/1,200 lb WD/WDTW | Class 4 | Best documented overall |
WC = weight carrying; WD = weight distributing; TW = tongue weight; WDTW = weight-distributing tongue weight. Published receiver ratings do not override Toyota’s vehicle-specific towing, payload, axle, or tongue-weight limits.
This roundup is reader-supported. When you click through qualifying links, we may earn a referral commission at no extra cost to you.
