CURT Trailer Hitches Guide: Classes, Best Models and Which to Buy

Quick Answer

CURT is the largest US trailer hitch brand, making vehicle-specific receiver hitches in Class 1 through Class 5, plus ball mounts, hitch balls, locks, wiring harnesses and weight-distribution systems. To buy the right one, look up your vehicle on CURT’s fit guide, choose the class that matches your towing weight (Class 3 with a 2-inch receiver covers most SUVs and half-ton trucks), and pair it with a ball mount that gives the correct drop. CURT hitches are bolt-on with no drilling on most applications, come powder-coated over e-coat, and carry a limited lifetime warranty.

Key Takeaways

  • CURT hitch classes: 1 (2,000 lb, 1¼-in), 2 (3,500 lb, 1¼-in), 3 (up to 8,000 lb, 2-in), 4 (10,000 lb, 2-in), 5 (up to 20,000 lb, 2 or 2½-in).
  • Use CURT’s vehicle fit guide; hitches are year, make, model and body-style specific.
  • Most CURT hitches bolt to existing frame holes; a plug-in wiring harness is a separate part.
  • The ball mount must match the receiver size and give the right rise or drop to keep the trailer level.
  • CURT is owned by Lippert and competes with Draw-Tite and Reese (Horizon Global); quality and fit are comparable.
  • Lifetime limited warranty on the hitch; finish holds up well with occasional touch-up.

CURT shows up on more vehicles than any other hitch brand, partly because it fits nearly everything and partly because it is sold everywhere from Amazon to local installers. The brand’s catalog is huge, which makes it hard to know what to order. This guide explains the hitch classes CURT uses, how to find the correct receiver for your vehicle, what else you need (ball mount, ball, wiring, lock), how CURT compares with its main rivals and what installation involves. Weight ratings are CURT’s; the lowest rating in your setup, including the vehicle’s own tow rating, is the one that counts.

CURT Hitch Classes Explained

Class Receiver size Max gross trailer weight Max tongue weight Typical vehicles
Class 1 1¼ in 2,000 lb 200 lb Compact cars, small crossovers; bike racks, small utility trailers
Class 2 1¼ in 3,500 lb 350 lb Midsize cars, crossovers; small campers, jet skis
Class 3 2 in Up to 8,000 lb (varies by hitch) Up to 800 lb SUVs, minivans, half-ton trucks; most trailers
Class 4 2 in 10,000 lb 1,000 lb Full-size trucks and SUVs; larger campers, car haulers
Class 5 (Xtra Duty / Commercial Duty) 2 in or 2½ in 16,000–20,000 lb 1,600–2,700 lb Heavy-duty trucks; equipment and large trailers

Each CURT hitch lists its own ratings, which may be below the class maximum. Weight-distribution ratings are higher than weight-carrying ratings on Class 3 and above.

Finding the Right CURT Hitch for Your Vehicle

CURT hitches are built for specific year, make, model and body-style combinations, so a 2019 RAV4 hitch does not fit a 2026 RAV4. Use the fit guide on CURT’s site or a retailer’s vehicle selector, enter your vehicle, and you will usually see one to three options: a Class 1 or 2 for light duty and a Class 3 for towing. Choose the class by the heaviest trailer you expect to tow, within your vehicle’s own tow rating, which is in the owner’s manual and governs regardless of the hitch. For a bike rack only, a Class 1 or 2 is sufficient and often sits more discreetly; for any trailer, go Class 3 with a 2-inch receiver so standard accessories fit.

What Else You Need

  • Ball mount: slides into the receiver and carries the ball. Measure the receiver height and the trailer coupler height when level and choose a mount with the rise or drop that makes up the difference. CURT sells fixed, adjustable and aluminum mounts.
  • Hitch ball: 1⅞-inch for light trailers, 2-inch for most, 2 5/16-inch for heavy trailers; the size is stamped on the coupler. Match the shank to the ball mount hole and torque properly.
  • Wiring: CURT’s custom harnesses plug into the vehicle’s tail-light connectors with no splicing; a 4-flat is standard, a 7-way is needed for trailers with electric brakes.
  • Hitch pin and lock: a 5/8-inch pin for 2-inch receivers; a locking pin deters theft of the ball mount and bike rack.
  • Brake controller: required for most trailers with electric brakes, typically over 3,000 lb. CURT makes the Echo (Bluetooth, plugs into the 7-way) and dash-mounted units.
  • Weight-distribution hitch: for Class 3–5 towing near the vehicle’s limit, CURT’s TruTrack and round-bar systems level the vehicle and control sway.

Installation

Most CURT receivers bolt to existing holes in the frame or bumper beam using fishwire to pull carriage bolts through the frame; the instructions and hardware are included and the job takes one to two hours with hand tools and a torque wrench. Some vehicles require lowering the exhaust or trimming the fascia; CURT’s instructions say so, and a ‘no drilling required’ note in the listing is the one to look for if you want to avoid cutting. Professional installation runs roughly $100–$250 at most shops, and U-Haul installs CURT hitches at its locations. Wiring harnesses are plug-and-play on most vehicles and can be done at the same time.

CURT vs Draw-Tite vs Reese

CURT, Draw-Tite and Reese are the three dominant US hitch brands; Draw-Tite and Reese are sister brands under Horizon Global, and CURT belongs to Lippert. All three build to the same SAE J684 standard, use similar steel and finishes, and offer lifetime warranties. Differences are in fit for a particular vehicle (one brand may tuck higher or avoid a fascia cut where another does not), accessory ecosystems and price on a given day. CURT’s catalog is the broadest and its e-coat-plus-powder-coat finish is among the more durable. A reasonable approach is to pick the brand whose hitch for your specific vehicle has the cleaner install and better reviews.

Care and Longevity

Touch up chips in the powder coat to prevent rust, keep the receiver tube plugged when not in use so it does not fill with road salt and water, grease the ball lightly, and check bolt torque once a year. CURT’s lifetime limited warranty covers the hitch against defects; it does not cover rust from finish damage left unrepaired or overloading. A CURT receiver on a vehicle that sees winter roads typically outlasts the vehicle with that minimal care.

Frequently Asked Questions

Which CURT hitch class do I need?

Match the class to your heaviest trailer within the vehicle’s tow rating: Class 1–2 for bike racks and trailers under 3,500 pounds, Class 3 (2-inch receiver) for most SUVs and trucks towing up to 8,000 pounds, Class 4–5 for heavier loads on full-size trucks.

Are CURT hitches good quality?

Yes. CURT builds to the SAE J684 standard, uses an e-coat and powder-coat finish, and backs hitches with a lifetime limited warranty. Quality is comparable to Draw-Tite and Reese.

Do CURT hitches require drilling?

Most bolt to existing holes with no drilling, though some vehicles need the exhaust lowered or the fascia trimmed. The product listing and instructions state the requirements for your vehicle.

How much does it cost to install a CURT hitch?

Roughly $100–$250 for professional installation, plus the hitch. Many owners install it themselves in one to two hours with hand tools and a torque wrench.

Does a CURT hitch come with wiring?

No. The wiring harness is a separate part. CURT sells vehicle-specific plug-in harnesses in 4-flat and 7-way configurations.

Conclusion

Buying a CURT hitch comes down to three decisions: the class that matches your towing, the exact part number for your vehicle from the fit guide, and the ball mount and wiring that complete the setup. Choose a Class 3 with a 2-inch receiver unless you only need a bike rack, bolt it on or have a shop do it, plug the receiver when it is idle, and it will likely be the last hitch that vehicle needs.

Related reading

Sharing Is Caring:
About the Author

Tony B. Hensel is the founder and lead author of GoMyReview.com, a trusted source for honest, hands-on product reviews and buyer’s guides. With over 10 years of experience in consumer research and a background in journalism, Tony combines clarity, accuracy, and real-world testing to help readers make smarter buying decisions.

Before starting GoMyReview.com, Tony worked as a freelance tech writer, contributing to online publications and staying current with trends in home gadgets and electronics. Today, he leads a small team of reviewers, ensuring every article is practical, unbiased, and easy to follow.

At GoMyReview, Tony personally covers kitchen appliances and cookware, home décor and furniture, cleaning and home improvement, camping and outdoor gear, clothing, welding and workshop tools, and automotive parts and accessories, while specialist authors handle drones, fishing and outdoor safety, and baby gear.

When he’s not writing, Tony enjoys home cooking, photography, and DIY projects. Based in the Midwest, he brings personal passion and professional integrity to every review—so readers can shop with confidence.

Leave a Comment