Best Phone Holder for Mercedes E-Class W213 (2016-2023)

The best phone holder for a Mercedes E-Class W213 (built 2016 to 2023) depends on how permanent you want it. A vehicle-specific clip such as Brodit’s ProClip for the E-Class saloon gives the neatest, most stable fit; a MagSafe vent mount is the quickest option for iPhones; and a dash-top clamp suits large phones in thick cases.

One W213 quirk to know before buying: the centre air vents are round, so many standard vent clips don’t hold well.

Best Phone Holder for Mercedes E-Class W213: Options Compared

Best phone holder for Mercedes E-Class W213 mounted on the dashboard
Option How it fits Pros Limitations
Brodit ProClip (E-Class saloon, W213) Snaps into the dash trim gap above the vents; no drilling Very stable, tidy, separate LHD/RHD versions Needs a separate phone cradle; specific to the car
MagSafe vent mount (e.g. Lamicall) Hook or clip on a vent One-handed, fast, compact iPhone 12+ or metal plate needed; check round-vent compatibility
Dash-top clamp mount Suction or adhesive base Holds big phones and thick cases Adhesive can mark trim; suction may slip in heat
Windscreen suction mount Low on the glass High, easy-to-see position Must not block your view or sensors

Know Your W213 Before You Buy

  • Years: the W213 saloon ran from 2016 to 2023, facelifted around 2020. It was replaced by the W214, which has a different dashboard.
  • Body styles: estate (S213), coupe (C238) and cabriolet (A238) share much of the interior, but confirm fitment for vehicle-specific mounts.
  • Steering side: Brodit lists separate left- and right-hand-drive versions (for example, its UK site lists the RHD ProClip for the E-Class saloon as part 655207).
  • Vents: the centre vents are round, which rules out many flat-blade clips.

Top Picks by Use

Best fixed mount: Brodit ProClip

Per Brodit, the E-Class saloon ProClip hooks behind the trim in front of the display and clips over the vent trim, without drilling or dismantling. You then add a Brodit phone holder or a universal cradle. It is the closest thing to a factory mount.

Best for iPhone: MagSafe vent mount

A MagSafe vent mount such as Lamicall’s lets you attach and remove the phone in one motion. Choose one with a hook-style clip or a design listed for round vents, and use a MagSafe-compatible case.

Best for big phones: dash-top clamp

A clamp cradle on a short arm holds large or heavy phones and thick cases securely. Use an adhesive disc rated for textured dashboards, and keep it away from airbag covers.

Where to Mount a Phone in a W213

  • Good: above or on the centre vents, or low on the windscreen on the driver’s side where it doesn’t block the road.
  • Avoid: behind the rear-view mirror (driver-assistance camera and sensors), airbag covers, and anywhere that hides the instrument display.

Using Google Maps in the UK? See our guide to phone mounts for Google Maps sat nav and UK placement rules.

Hot Weather and Stability Tips

  • Clean the surface with the supplied alcohol wipe before fitting adhesive or suction mounts.
  • Give adhesive 24 hours to cure before loading it with a phone, if the maker recommends it.
  • Don’t leave the phone mounted in direct summer sun; phones can overheat and shut down.
  • Recheck suction cups after hot or cold spells.

Checklist Before You Buy

  1. Correct generation (W213, not W212 or W214) and body style
  2. LHD or RHD version for vehicle-specific mounts
  3. Phone size and case thickness
  4. Side buttons and charging port left clear
  5. Charging: cable, Qi or MagSafe for long drives

Comparing other cars? See our Hyundai Tucson phone mount guide, the MagSafe holder guide for the Toyota Highlander, and our Mercedes C-Class dash cam guide.

FAQ

Which years are the Mercedes E-Class W213?

The W213 E-Class saloon was built from 2016 to 2023, with a facelift around 2020. It was replaced by the W214. Estates, coupes and cabriolets use different codes (S213, C238, A238), so check fitment for your body style.

What is the best phone holder for a W213 E-Class?

For a fixed, factory-like position, a vehicle-specific clip such as Brodit’s ProClip for the E-Class saloon is the tidiest option. For flexibility, a MagSafe vent mount suits iPhone users and a dash-top clamp mount suits larger Android phones.

Do normal vent clips work on the W213’s round vents?

Many don’t grip well. The W213’s centre vents are round, so look for mounts designed for round vents or hook-style clips, and check the listing photos for an E-Class interior.

Is there a left-hand-drive and right-hand-drive version of the Brodit mount?

Yes. Brodit lists separate LHD and RHD ProClip versions for many cars, including the E-Class saloon. Order the one that matches your steering side.

Where should I not mount a phone in a W213?

Avoid the area behind the rear-view mirror (it houses driver-assistance cameras and sensors), airbag covers, and any spot that blocks your view of the road or the instrument display.

Will a mount work with a thick phone case?

Clamp mounts with wide arms handle thick cases best. MagSafe mounts need a MagSafe-compatible case, and very thick cases weaken the magnetic hold.

Sharing Is Caring:
About the Author

Nathan Rhodes is a writer at GoMyReview who focuses on practical automotive troubleshooting, vehicle maintenance, and consumer technology. He creates clear, reader-friendly guides that help everyday users understand common problems and make informed decisions. His work covers topics ranging from Toyota Camry engine and cooling issues to laptop performance and temperature monitoring. Nathan is committed to careful research, straightforward explanations, and useful solutions that readers can confidently apply.

Leave a Comment