As an Amazon Associate, GoMyReview earns from qualifying purchases. This doesn’t affect our recommendations.
The best phone mounts for drone controllers clamp to the controller body (not the stock phone clip) and match the screen you actually fly with. For a tablet or foldable on a DJI RC-N1, RC-N2 or RC-N3, pick a body-clamp holder like the Hanatora or FPVtosky. For a regular phone, a small tilt bracket or magnetic stand is enough.
Below are six options, what each one is for, and a checklist to confirm fit before you buy. Specs are taken from the Amazon listings, so confirm details on the product page.
Quick Picks
| Best for | Product | Mount style |
|---|---|---|
| Large phones and small tablets | Hanatora RC-N3/N2/N1 tablet holder | Body clamp, foldable arm |
| Packable tablet setup | FPVtosky no-disassembly tablet holder | Foldable bracket |
| Low-profile phone setup | STARTRC adjustable magnetic phone stand | Magnetic, tilting |
| Cheap glare fix for phones | Tilt stand phone holder bracket | Strap-on tilt |
| Widest screen range | 4.7–13″ phone/tablet holder mount | Body clamp |
| Lightweight tablet clip | HeiyRC tablet holder mount | Clip-on bracket |
Compatibility Checklist for Phone Mounts for Drone Controllers
- Controller model: Most third-party mounts here target DJI’s screenless RC-N1, RC-N1C, RC-N2 and RC-N3. Controllers with a built-in screen (DJI RC, RC 2, RC Pro) don’t need a phone mount.
- Screen size: Measure your device diagonally and its width with the case on. Compare against the range in the listing (e.g. 4.7–13 inches or 7–12 inches).
- Weight: Tablets and foldables are heavy and top-heavy. Choose a body clamp, not a clip that hangs off the stock phone holder.
- Cable: Check that the mount leaves room for the controller-to-device cable, or that the kit includes a longer cable.
- Buttons and antennas: Make sure the clamp won’t press side buttons and doesn’t block the controller antennas.
- Packing: If you keep the controller in a fitted case, check whether you must remove the mount first.
Pair any heavy setup with a neck strap. See our DJI controller lanyard picks.
Hanatora RC-N3/N2/N1 Tablet Holder
This holder clamps to the controller body and holds a large phone or small tablet on an arm above the sticks. It’s the pick if you fly with an iPad mini-size screen or a foldable.
The listing names RC-N1, RC-N1C, RC-N2 and RC-N3 compatibility, a 4.7–13 inch device range, and a neck lanyard in the box. It lists a weight of about 196 g, so it’s not the most compact option.
- Good for: tablets, foldables, mapping and framing on a bigger screen
- Limitations: bulkier when folded; adds weight to the controller
FPVtosky No-Disassembly Tablet Holder
A foldable tablet bracket that attaches without taking the controller apart. The listing pitches it for 7–12 inch tablets and lists drones that ship with RC-N-series remotes, such as the Air 3S, Air 3, Mini 4K and Neo.
The listing says it includes two cables and weighs roughly 72 g. It’s lighter than most body-clamp tablet mounts.
- Good for: carrying a tablet setup in a controller bag
- Limitations: check your exact controller on the listing; a lanyard may get in the way of folding
STARTRC Adjustable Magnetic Phone Stand
A small magnetic stand for pilots who fly with a phone, not a tablet. It mounts to the controller and lets you tilt the phone to cut glare.
The listing names RC-N1, RC-N2 and RC-N3 compatibility and a zinc alloy build. Magnetic holds suit normal phones; don’t hang a heavy foldable or tablet from it.
- Good for: fast setup, small footprint, everyday phone flying
- Limitations: phones only; check fit with thick cases
Tilt Stand Phone Holder Bracket
Our earlier version called this the “Ailenice Bracket.” The linked listing is a generic tilt stand phone holder bracket, so check the brand on the product page.
It straps onto the existing phone clip and angles the screen up a few degrees. That makes the screen easier to read in sun and reduces neck strain. It’s a plastic, low-cost add-on, not a tablet mount.
- Good for: a cheap viewing-angle fix for phone flyers
- Limitations: basic plastic; bulky cases may need a re-fit
4.7–13″ Phone Tablet Holder Mount
Our earlier version labeled this “LYONGTECH.” The linked listing is titled as a 4.7–13″ phone/tablet holder mount, so confirm the brand on Amazon.
It clamps to RC-N1, RC-N1C, RC-N2 and RC-N3 controllers per the listing. Like the Hanatora, it trades compact packing for a steadier hold on larger screens.
- Good for: pilots who switch between a phone and a tablet
- Limitations: chunky folded size; fits best in a camera bag
HeiyRC Tablet Holder Mount
A light clip-style tablet holder. The listing claims a 7–11 inch range (iPad mini and Air size) and a weight of about 30 g.
It’s easy to carry, but a light plastic clip won’t feel as solid as a full body clamp with a heavy tablet.
- Good for: tablet users who want the smallest add-on
- Limitations: simple plastic build; check case thickness
How to Choose
- Phone only? A tilt bracket or magnetic stand is enough. The stock DJI clip already holds most phones.
- Tablet or foldable? Use a body-clamp holder rated for your screen size.
- Travel a lot? Prefer the lightest folding design that still fits your device.
- Bright sun? An adjustable tilt helps more than a bigger screen. A sun hood also helps.
Setting up a full kit? See our DJI Mini 4 Pro accessories and Mavic 4 Pro accessories guides.
Comparison Table
| Product (listing name) | Image | Compatible (per listing) | Load / weight (per listing) | Mount type |
|---|---|---|---|---|
| Hanatora RC-N3/N2/N1/N1C Remote Controller Tablet Holder |
|
RC-N1, RC-N1C, RC-N2, RC-N3 | Up to 1.4 lb (635 g) load | Body clamp |
| No Disassembly Tablet Holder for DJI (FPVtosky) |
|
RC-N-series drones incl. Air 3S, Air 3, Mini 4K, Neo | About 72 g | Foldable |
| STARTRC Adjustable Magnetic Phone Stand |
|
RC-N1, RC-N2, RC-N3 | About 110 g | Magnetic |
| Tilt Stand Phone Holder Bracket |
|
Smartphones on DJI phone clips | Not listed | Strap-on |
| 4.7–13″ Phone Tablet Holder Mount |
|
RC-N1, RC-N1C, RC-N2, RC-N3 | Not listed | Body clamp |
| HeiyRC Tablet Holder Mount |
|
7–11″ tablets | About 30 g; listing claims 4.4 lb load | Clip-on |
FAQ
Do I need a phone mount for my drone controller?
Not for most phones. DJI RC-N1, RC-N2 and RC-N3 controllers have a built-in phone clip. A mount helps if you use a tablet or foldable, or want a better viewing angle.
Can I put an iPad on a DJI RC-N2 or RC-N3?
Yes, with a third-party tablet holder that clamps to the controller body. Check that your tablet’s size, with its case, is inside the listed range.
Are magnetic phone mounts safe for flying?
They work for normal phones when seated properly. For heavy phones, foldables or tablets, use a mechanical clamp and a neck lanyard.
Will a mount work with the DJI RC or RC 2?
Those controllers have a built-in screen, so they don’t use a phone. The mounts in this list are for screenless RC-N-series remotes.
How do I stop glare on my phone screen?
Tilt the screen toward you with an angled bracket, turn screen brightness to max, and use a sun hood in bright light.
Also flying at dusk? See our drone strobe lights guide.
