Best Tablet Holders for DJI RC-N3

Can you use a tablet with the DJI RC-N3? DJI lists the RC-N3 for phones up to 180 x 86 x 10 mm and does not list tablets. The tablet holders for DJI RC-N3 below fill that gap: each one clamps a larger screen, and you connect the tablet with the RC cable (USB-C or Lightning end) that comes with the controller. Check that the DJI Fly app runs on your tablet before you buy.

Hanatora, FPVtosky and LYONGTECH name the RC-N3 in their listings. For HeiyRC and AILENICE, the details we found do not clearly name it, so confirm fit on the listing. AILENICE is a phone holder, not a tablet holder. Last checked: October 2026.

Top Picks

How We Chose Tablet Holders for DJI RC-N3

We compared each product listing. We looked at the controllers it names, the clamp range, how it attaches, weight, and what comes in the box. We also used DJI’s own limit for the RC-N3: phones up to 180 x 86 x 10 mm.

A tablet is larger than that limit, so the holder must carry the tablet on its own mount. We have not hands-on tested these holders, and the clamp ranges below come from the listings.

Hanatora Holder

The Hanatora is a foldable holder named for the RC-N3, N2, N1 and N1C controllers. Its listing gives a clamp range of 4.7 to 13 inches and a 1.4 lb limit. Two joints let you set the arm and the clip angle, and a neck lanyard comes with it.

It suits you if you want a bigger screen than a phone on your RC-N3. A tablet is outside what DJI lists for the controller, so test the setup on the ground before you fly.

What People Say

We have not read every review, so skim the recent ones for notes on your controller and tablet case.

Overall Sentiment: Positive

Pros and Cons

• Pro: Product name lists the RC-N3, N2, N1 and N1C
• Pro: Wide listed clamp range of 4.7 to 13 inches
• Con: The listing gives 6.88 oz, which is more weight than a basic clip adds
• Con: A large tablet is beyond DJI’s phone limit and makes the controller top-heavy

Situational Benefits

Ease Of Use

Versatility

The listing names the RC-N1, N2 and N3 controllers and a 4.7 to 13 inch range, which covers phones, foldables and many tablets. Check your tablet’s width and case thickness against the clamp before you fly.

Safety Features

The listing gives a 1.4 lb limit and a one-button release. Stay under the limit and use the lanyard. Shake the controller gently on the ground to check the grip. A large tablet makes the controller top-heavy, so hold it with both hands.

Practicality

This is practical if you want one holder for both a phone and a tablet. The trade-off is weight: it is heavier than a simple clip.

Travel Friendliness

It folds and comes with a lanyard. Expect it to take more room in your bag than a small clip.

Key Benefits

• Made for RC-N1, N2 and N3 controllers (per the listing)
• Listed clamp range of 4.7 to 13 inches
• Two joints to set arm and clip angle
• Includes a neck lanyard

Get Details

FPVtosky Holder

The FPVtosky is a foldable holder that lists the RC-N1, N2 and N3. Its listing gives a 7 to 12 inch range, so it covers an iPad mini, iPad Air and 11 inch iPad Pro, and says you can leave the tablet case on. The box holds a USB-C cable, an iOS cable, a lanyard and a screwdriver.

Pick it for a full-size tablet. The tablet is still outside what DJI lists for the RC-N3, so test the setup on the ground first.

What People Say

We have not read every review, so skim the recent ones for notes on your controller and tablet case.

Overall Sentiment: Positive

Pros and Cons

• Pro: Lists the RC-N1, N2 and N3 and tablets from 7 to 12 inches
• Pro: Cables and a lanyard come in the box
• Con: Setup uses a screwdriver, so it is not tool-free
• Con: A 12 inch tablet is far beyond DJI’s phone limit and makes the controller top-heavy

Situational Benefits

Ease Of Use

Versatility

The listing names the RC-N1, N2 and N3 and tablets from 7 to 12 inches, cases included. Its list of drones is a marketing list. What matters is that you hold one of those controllers.

Safety Features

The listing describes a double-screw clamp. Tighten both screws, tilt the controller on the ground to test the grip, and use the lanyard. Do not over-tighten the screws on a tablet case.

Practicality

It folds for storage, and the cables and lanyard in the box mean fewer extras to buy.

Travel Friendliness

It folds, so it packs more easily than a fixed mount. Check the folded size against your controller case.

Key Benefits

• Lists the RC-N1, N2 and N3
• Clamps 7 to 12 inch tablets, cases included (per the listing)
• USB-C and iOS cables plus a lanyard in the box
• Folds for storage

Get Details

AILENICE Bracket

The AILENICE is a strap-on tilt stand for phones. It is not a tablet holder, so it is the odd one out in this list. It tilts a phone up for an easier view, and the table calls it a universal smartphone holder.

The details we found do not clearly name the RC-N3. Check the listing and your phone size against DJI’s limit of 180 x 86 x 10 mm before you buy.

What People Say

That is a small sample, so skim the recent reviews for fit on your controller.

Overall Sentiment: Positive

Pros and Cons

• Pro: Strap-on design (per the table)
• Pro: Listed as improving viewing comfort
• Con: Phones only, not a tablet holder
• Con: RC-N3 fit is not clearly stated in the details we found

Situational Benefits

Ease Of Use

Versatility

The table lists universal smartphones. We could not confirm fit on the RC-N3 from the details we found, so check the listing before you buy.

Safety Features

Strap it on firmly and shake the controller gently on the ground before you fly. Keep the strap clear of the antennas and buttons.

Practicality

A simple add-on if you only want a tilted phone and not a tablet.

Travel Friendliness

Packed size is not given in the details we found, so check the listing.

Key Benefits

• Strap-on design
• Tilted phone for easier viewing (listed as improving viewing comfort)
• Listed as universal for smartphones

Get Details

LYONGTECH Mount

The LYONGTECH is a phone and tablet holder with a listed range of 4.7 to 13 inches. The table below lists the RC-N1, N2 and N3 as compatible. It has the fewest reviews of the five, so there is less owner feedback to go on.

We could not find a clamp, weight or build detail for it that we trust, so check the listing closely before you buy.

What People Say

That is a small sample, so read the recent reviews before you decide.

Overall Sentiment: Positive

Pros and Cons

• Pro: The table lists the RC-N1, N2 and N3
• Pro: Wide listed range of 4.7 to 13 inches
• Con: Weight limit and build details are not clear

Situational Benefits

Ease Of Use

Versatility

The table lists the RC-N1, N2 and N3, and the listed range of 4.7 to 13 inches covers phones to large tablets. Check that the clamp fits your tablet and case.

Safety Features

We found no weight limit for this holder. Keep the tablet light, shake the controller gently on the ground, and watch for slipping before you fly.

Practicality

A simple choice if you swap between a phone and a tablet.

Travel Friendliness

The table lists it as lightweight. We found no folded size, so check the listing.

Key Benefits

• Lists the RC-N1, N2 and N3
• Listed range of 4.7 to 13 inches
• Lightweight, per the table
• Versatile mounting options, per the table

Get Details

HeiyRC Clip

The HeiyRC is a small adjustable holder for tablets the size of an iPad mini or iPad Air, according to the table below. Its listing names DJI drones, not the RC-N3, so we could not confirm RC-N3 fit.

If you want a light holder for a small tablet, it is a candidate. Check that the listing names your controller first.

What People Say

We have not read every review, so skim the recent ones for notes on your controller.

Overall Sentiment: Positive

Pros and Cons

• Pro: Adjustable and portable, per the table
• Pro: Lists iPad mini and iPad Air sizes
• Con: RC-N3 fit is not clearly stated in the details we found
• Con: Listed only for iPad mini and iPad Air sizes

Situational Benefits

Ease Of Use

Versatility

The table lists the iPad mini and iPad Air. Check the size range on the listing, and check your tablet case, before you buy.

Safety Features

We found no confirmed weight rating for this clamp. The grip is what to test: shake the controller gently on the ground before you fly. Do not treat the controller as waterproof.

Practicality

It does the basic job of holding a small tablet. It is a light, simple add-on with no extras listed.

Travel Friendliness

The table lists it as portable. Check the listing for its size and weight.

Key Benefits

• Adjustable, per the table
• Portable, per the table
• Lists iPad mini and iPad Air

Get Details

FAQ

Can The RC-N3 Hold A Tablet?

DJI lists the RC-N3 for phones up to 180 x 86 x 10 mm and does not list tablets. The built-in clamp cannot hold a tablet. A third-party holder can, with the tablet joined to the controller by the RC cable. This is outside DJI’s listed specs, so test it on the ground and check that DJI Fly runs on your tablet. Measure your tablet and compare it with the holder’s clamp range.

How Stable Is The Mount In Flight?

Look for a clamp with screws or a lock, use the lanyard, and keep the tablet light. Shake the controller gently on the ground before you take off. A big tablet makes the controller top-heavy and tiring to hold, so a smaller screen is easier to fly with.

How Easy Is It To Install And Store?

Check what is in the box. The FPVtosky listing includes a screwdriver, two cables and a lanyard. Practice mounting and folding at home, and route the cable so it does not pinch when you fold the holder. Store the folded holder in your controller case.

Which Holder Suits You

Start with your screen size. For a full-size tablet up to 12 inches, the FPVtosky is the listed fit. For the widest listed clamp range (4.7 to 13 inches), look at the Hanatora or LYONGTECH. For an iPad mini or iPad Air size, the HeiyRC is the small option. If you only fly with a phone and want a tilted view, that is the AILENICE.

Wrapping Up

Choose by screen size. DJI supports phones up to 180 x 86 x 10 mm on the RC-N3, so a tablet needs a third-party holder.

The FPVtosky covers full-size tablets, the Hanatora and LYONGTECH list the widest clamp range, the HeiyRC suits small tablets, and the AILENICE is for phones only. Before every flight, tighten the clamp, use the lanyard and shake-test the controller on the ground. Tablet use is not an official DJI setup.

Last checked: October 2026. Availability of DJI drones and third-party accessories varies, so confirm fit on the listing before you buy.

This Roundup is reader-supported. When you click through links we may earn a referral commission on qualifying purchases.