As an Amazon Associate I earn from qualifying purchases.
The DJI RC 2 has a built-in 5.5 inch, 1080p screen that DJI rates at 700 nits. That is bright, but direct sun can still wash it out, and a sun hood shades it. The sun hoods for DJI RC 2 below are made for the RC 2 only, not the RC-N1, N2, N3 or RC Pro, so make sure the listing names the RC 2 before you buy.
A hood shades the screen but does not make it brighter, so turn the brightness up as well. DJI pairs the RC 2 with drones such as the Air 3, Air 3S, Mini 4 Pro and Mini 5 Pro. Last checked: October 2026. Availability of DJI drones and third-party accessories varies.
Top Picks
|
Category |
Product |
|---|---|
|
🏆 Best Fit & Protection |
|
|
💰 Best 2-in-1 Hood And Cover |
|
|
🎯 Best All-Around Kit |
|
|
⭐ Best Anti-Skid Design |
How We Chose Sun Hoods for DJI RC 2
Fit comes first. A hood made for another controller will not sit right on the RC 2, so we looked for the RC 2 by name in each listing.
We then compared how the hood attaches, how it folds, what else is in the kit (lanyard, screen protector) and the listed weight. We did not test these hoods ourselves. Weights and sizes come from the comparison table below and from the listings.
FPVtosky Hood
The FPVtosky Hood is made for the RC 2 only. Its listing says it is not for the RC-N series or the RC Pro. It has foldable side panels for shade and screws you tighten by hand, so no tools are needed. The listing calls it a 3-in-1 that also protects the screen, joysticks and buttons, and gives the weight as 4.87 oz.
Pick it if you want a plain hood for the RC 2 without extras. Check the folded size against your case before you buy.
What People Say
We have not read every review, so skim the recent ones for notes on fit and your case.
Overall Sentiment: Positive
Pros and Cons
- Pro: Made for the RC 2, and the listing says it is not for RC-N or RC Pro
- Pro: Foldable side panels and hand-tightened screws, so no tools
- Con: The listing gives 4.87 oz, which adds weight to a controller DJI lists at about 420 g
- Con: Fits the RC 2 only
Situational Benefits
|
Situation |
How It Helps |
|---|---|
|
Bright Sunny Launch Sites |
Cuts glare so you can frame shots and read flight data without shading the controller with your hand. |
|
Transport In Hard Cases |
The table lists rubber padding. Check that your case closes with the hood on. |
|
Quick Field Setups |
Fast thumb-screw install and fold-down design let you deploy or stow the hood without slowing a rapid setup. |
|
Extended Outdoor Shoots |
Reduces eye strain and the need to reposition the controller repeatedly, which helps maintain steady framing over long sessions. |
Versatility
It is made for the RC 2. The listing title names drones that use the RC 2, such as the Air 3S and Mini 5 Pro. It is not for the RC-N series or the RC Pro.
Aesthetic Appeal
The listing gives the colour as grey.
Safety Features
The listing calls it a 3-in-1 that also protects the screen, joysticks and buttons. The hood is held on by hand-tightened screws, so check them before each flight.
Durability
The table lists rubber padding. The listing we found does not name the hood material. Any hood can crack if it is dropped or squeezed in a tight case, so check how your case fits.
Practicality
Installation is tool-free. Fold the side panels before packing and check that your case closes with the hood on.
Key Benefits
- Three-sided glare reduction with foldable panels (per the listing)
- Hand-tightened screws, no tools needed
- Made for the RC 2 only
- Rubber padding (per the table)
FPVtosky 2in1
The FPVtosky 2-in-1 is a sun hood and cover for the RC 2. The table names it the Lito X1/Mini 5/4 Pro RC 2 Sun Hood and Cover, which lists drones that pair with the RC 2. At 81 g it is the lightest hood in the table.
It suits you if you want shade and a cover in one piece and no extras. The table does not list a lanyard or screen film, so you would add those yourself.
What People Say
We have not read every review, so skim the recent ones for notes on fit and your case.
Overall Sentiment: Positive
Pros and Cons
- Pro: Lowest listed weight in the table: 81 g
- Pro: Anti-fall design and screws included, per the table
- Con: No lanyard or screen film in the table highlights
- Con: The listing we found says little about how it folds
Situational Benefits
|
Situation |
How It Helps |
|---|---|
|
On Busy Shoots |
Speeds setup by combining shade and protection so you don’t juggle multiple accessories between takes. |
|
Travel With Gear |
The table lists 81 g, the lowest in the table. Check the folded size against your case. |
|
High-Contrast Sunlight |
Provides consistent glare reduction so you can frame shots without shadowing the screen with your hand. |
|
Field Maintenance |
The protective cover shields the screen during transport and quick adjustments, lowering the risk of scratches. |
Versatility
It is made for the RC 2, and the table now says so. Do not assume it fits other controllers. Check that the listing names the RC 2.
Aesthetic Appeal
Looks are plain and functional. The listing we found gives no finish details.
Safety Features
The table highlights an anti-fall design and included screws. Check that the screws are tight before each flight.
Durability
The material is not stated in the details we found. Check how your case fits, and do not squeeze the hood in a tight bag.
Practicality
It combines shade and a cover in one piece, so there is one item to fit and carry.
Key Benefits
- Sun hood and cover in one
- Anti-fall design (per the table)
- 81 g, the lowest weight in the table
- Screws included
Arzroic Kit
The Arzroic kit bundles an adjustable, foldable sun hood for the RC 2 with a screen protector and a neck lanyard. At 5.1 oz per the table, it is close in weight to the plain FPVtosky Hood.
It suits you if you need all three items and would rather buy one kit than three parts.
What People Say
We have not read every review, so skim the recent ones for notes on fit and your case.
Overall Sentiment: Positive
Pros and Cons
- Pro: Hood, screen protector and lanyard in one kit
- Pro: Adjustable and foldable hood
- Con: At 5.1 oz it adds noticeable weight to the controller
Situational Benefits
|
Situation |
How It Helps |
|---|---|
|
Bright Sun |
Adjustable shade cuts glare so you can frame and monitor without contorting your stance. |
|
On The Move |
Neck lanyard keeps the controller secure while you walk between launch points, reducing the chance of drops. |
|
Travel And Storage |
Foldable hood and integrated protector reduce bulk and protect the screen when packed. |
|
Extended Shoots |
Comfortable hands-free option and reliable shade help you stay focused during long sessions. |
Versatility
The product name says RC 2. The hood is adjustable and foldable, but do not assume it fits other controllers. Check that the listing names the RC 2.
Aesthetic Appeal
The listing we found gives no finish details. The look is plain and functional.
Safety Features
The neck lanyard helps prevent drops, and the screen protector guards against scratches. Check the lanyard points and the hood fit before each flight.
Durability
The material is not stated in the details we found. Check how your case fits.
Practicality
Everything comes in one kit, so there are fewer parts to track. The hood folds for packing.
Key Benefits
- Hood, screen protector and neck lanyard in one kit
- Adjustable and foldable hood
- Product name says RC 2
- 5.1 oz per the table
STARTRC Hood
The STARTRC listing is named for the Mini 5 Pro and adds a lanyard and an anti-skid surface. The table calls it an upgraded 3-in-1 design. STARTRC sells hoods for several DJI controllers, including RC 2 and RC Pro versions, so make sure this listing names the RC 2 before you buy.
The weight in the table could not be confirmed, so it shows a dash. Check the listing for the weight before you buy.
What People Say
We have not read every review, so skim the recent ones for notes on fit and your case.
Overall Sentiment: Positive
Pros and Cons
- Pro: Lanyard included, per the table
- Pro: Anti-skid surface for grip, per the table
- Con: Weight is not confirmed in the details we found
Situational Benefits
|
Situation |
How It Helps |
|---|---|
|
Sunny Launch Sites |
Shades the screen so you can frame shots and monitor telemetry without repositioning the controller constantly. |
|
Active Field Work |
Lanyard and anti-skid surfaces reduce the risk of accidental drops while moving between locations. |
|
Travel Between Shoots |
Foldable design and integrated protector keep the screen safe in bags and cases without extra parts to track. |
|
Warm or Humid Conditions |
Anti-skid detail helps maintain a secure grip when hands are damp, improving control stability. |
Versatility
The listing is named for the Mini 5 Pro. STARTRC sells hoods for the RC, RC 2 and RC Pro, so check that this one names the RC 2. A hood for another controller will not fit.
Aesthetic Appeal
The listing we found gives no finish details.
Safety Features
The lanyard and anti-skid surface help you hold the controller securely. Check the lanyard points and the hood fit before each flight.
Durability
The material is not stated in the details we found. Check how your case fits.
Practicality
The lanyard and hood come together, so there is less to carry. Confirm RC 2 fit first.
Key Benefits
- Lanyard included, per the table
- Anti-skid surface for grip, per the table
- Upgraded 3-in-1 design, per the table
- Listing named for the Mini 5 Pro, so confirm RC 2 fit
FAQ
Will This Fit My RC 2?
Check that the listing names the RC 2. Hoods are shaped for one controller, so a hood for the RC-N1, N2, N3 or RC Pro will not fit. A drone name in the title, such as Mini 4 Pro or Mini 5 Pro, tells you which drones use that controller. It does not make the hood universal.
Compare the photos for the screen opening, the screw points and any cut-outs for a lanyard or case.
Will It Interfere With Controls Or Signal?
A hood should leave the sticks, buttons and ports free, but compare the photos with your controller. We could not verify signal effects for these hoods. If the link seems weaker, fly once without the hood to compare.
If you use a hard case, check that the folded hood fits with it on, so you do not need to remove it for every trip.
How Do I Install And Care For A Sun Hood?
Fit the hood, tighten the screws by hand and check that the screen and sticks are clear. Wipe it with a soft damp cloth, avoid harsh solvents, and check the screws from time to time.
Fold the hood before packing if it folds, and check that it fits your case.
Which Hood Suits You
Start with fit: the listing must name the RC 2. For a plain hood with folding side panels, the FPVtosky Hood is the simple choice. For the lowest listed weight, look at the FPVtosky 2-in-1. If you want a lanyard and screen protector in the kit, the Arzroic is the one. The STARTRC adds a lanyard and an anti-skid surface, but confirm RC 2 fit first.
Wrapping Up
Pick a hood that is made for the RC 2 and says so on the listing. Hoods for the RC-N series or RC Pro will not fit. A hood shades the screen but does not make it brighter, so raise the brightness too.
The FPVtosky Hood is a plain, RC 2-specific choice. The FPVtosky 2-in-1 has the lowest listed weight. The Arzroic comes with a screen protector and lanyard. The STARTRC adds a lanyard and an anti-skid surface, but confirm that it fits the RC 2.
Last checked: October 2026. Availability of DJI drones and third-party accessories varies, so confirm fit on the listing before you buy.
| Product Name | Image | Rating | Special Highlights | Dimensions | Weight |
|---|---|---|---|---|---|
| FPVtosky RC 2 Controller Sun Hood Cover |
|
See reviews on Amazon |
|
6.8″L x 5.3″W x 2.9″H | 4.87 ounces |
| FPVtosky 2-in-1 Lito X1/Mini 5/4 Pro RC 2 Sun Hood & Cover |
|
See reviews on Amazon |
|
6.77″L x 5.12″W x 2.16″H | 81 g |
| Arzroic RC 2 Protective Sun Hood Kit |
|
See reviews on Amazon |
|
6.7″L x 5.1″W x 2.5″H | 5.1 ounces |
| STARTRC Mini 5 Pro Sun Hood + Lanyard |
|
See reviews on Amazon |
|
6.69″L x 5.12″W x 2.36″H | – |
This Roundup is reader-supported. When you click through links we may earn a referral commission on qualifying purchases.
